Agenda for June 8 call

Hi all, The following is a proposed agenda for the OGSA call on June 8th, Thursday, from 8:30am to 10:30pm (CDT). (Sorry for the delay in sending this out.) Dial-in numbers for Thursday: Free: +1-888-452-0308 Intl/Toll: +1-484-644-0505 PIN: 71815 Screen share service will be provided. URL: http://ogsa.glance.net Session key: 0608 See more explanation: http://www-unix.gridforum.org/mail_archive/ogsa-wg/2004/06/msg00077.html 1) Early discussion (20 min) Note taker assignment Roll call Telecon minutes approval (June 1st) https://forge.gridforum.org/projects/ogsa-wg/document/minutes-20060601/en/1 Action Items status review (see the bottom of this email) Agenda bashing 2) July F2F update (20 min) Discuss tentative F2F agenda (attached) and new schedule requests (e.g., move BES session from Tuesday afternoon to some other time). 3) EMS scenario discussion (Steven and Andreas, 40 min) An updated draft including EPS scenario (Donal) and ACS scenario (Andreas) will be sent out before the call. 4) Wrap up (10 min) AOB <*NEXT CALL*> June 12 (Mon): CDDLM & EMS (Jun and Hiro) June 15 (Thu): Security & BSP Public Comments review (Frank and Takuya) Architecture & Glossary 1.5 (Andreas and Jem) June 19 (Mon): Information model (Ellen and Fred) Roadmap 1.1 (Hiro, ChrisJ, and Jem) June 22 (Thu): EMS scenarios (Steven and Andreas) June 26 (Mon): Security & BSP Public Comments review (Frank and Takuya) CDDLM & EMS (Jun and Hiro) <*ACTION ITEMS*> - Re-schedule the information model rendering discussion >From May 22 call - Jay will contact Platform (Chris Smith) and Condor (Miron Livny) to get feedback on pros / cons of the two rendering approaches - Darren/Andreas will take the Modeling position paper and discuss it within the JSDL-WG as well >From April 5 F2F meeting - Marvin to send e-mail that explains concerns on compliance suite by GGF & EGA. Deferred - Frank to write up and send to the list a one page summary of the authorization call-out proposal. (April 24 call, postpone until June 14) - Jay check and find out relatively small funding to Globus to develop document on their security work (April 6 F2F) - Hiro to schedule a discussion in the OGSA F2F after the converged specs drafts are released to discuss which sets of specs to use within OGSA. (April 4 F2F) -- Andreas Savva Fujitsu Laboratories Ltd

3) EMS scenario discussion (Steven and Andreas, 40 min) An updated draft including EPS scenario (Donal) and ACS scenario (Andreas) will be sent out before the call.
I am attaching an updated scenarios file (draft 4) for review tomorrow. As last time this is a pdf file with a change-tracked MS Word file inside. (I'll put this on the new gridforge after the transition is complete.) Andreas Andreas Savva wrote:
Hi all,
The following is a proposed agenda for the OGSA call on June 8th, Thursday, from 8:30am to 10:30pm (CDT). (Sorry for the delay in sending this out.)
Dial-in numbers for Thursday: Free: +1-888-452-0308 Intl/Toll: +1-484-644-0505 PIN: 71815
-- Andreas Savva Fujitsu Laboratories Ltd

Hi all, the direct link to the minutes for June 1st is different, as GridForge has been updated: http://forge.gridforum.org/sf/docman/do/downloadDocument/projects.ogsa-wg/docman.root.meeting_materials_and_minutes.telecon_minutes/doc13480/1 Cheers, Michel Andreas Savva wrote: > Hi all, > > The following is a proposed agenda for the OGSA call on June 8th, > Thursday, from 8:30am to 10:30pm (CDT). (Sorry for the delay in sending > this out.) > > Dial-in numbers for Thursday: > Free: +1-888-452-0308 > Intl/Toll: +1-484-644-0505 > PIN: 71815 > > Screen share service will be provided. > URL: http://ogsa.glance.net > Session key: 0608 > See more explanation: > http://www-unix.gridforum.org/mail_archive/ogsa-wg/2004/06/msg00077.html > > 1) Early discussion (20 min) > Note taker assignment > Roll call > Telecon minutes approval (June 1st) > https://forge.gridforum.org/projects/ogsa-wg/document/minutes-20060601/en/1 > Action Items status review (see the bottom of this email) > Agenda bashing > > 2) July F2F update (20 min) > > Discuss tentative F2F agenda (attached) and new schedule requests > (e.g., move BES session from Tuesday afternoon to some other > time). > > 3) EMS scenario discussion (Steven and Andreas, 40 min) > An updated draft including EPS scenario (Donal) and > ACS scenario (Andreas) will be sent out before the call. > > 4) Wrap up (10 min) > AOB > > <*NEXT CALL*> > June 12 (Mon): CDDLM & EMS (Jun and Hiro) > June 15 (Thu): Security & BSP Public Comments review (Frank and Takuya) > Architecture & Glossary 1.5 (Andreas and Jem) > June 19 (Mon): Information model (Ellen and Fred) > Roadmap 1.1 (Hiro, ChrisJ, and Jem) > June 22 (Thu): EMS scenarios (Steven and Andreas) > June 26 (Mon): Security & BSP Public Comments review (Frank and Takuya) > CDDLM & EMS (Jun and Hiro) > > <*ACTION ITEMS*> > > - Re-schedule the information model rendering discussion > >>From May 22 call > - Jay will contact Platform (Chris Smith) and Condor (Miron Livny) > to get feedback on pros / cons of the two rendering approaches > - Darren/Andreas will take the Modeling position paper and > discuss it within the JSDL-WG as well > >>From April 5 F2F meeting > - Marvin to send e-mail that explains concerns on compliance suite > by GGF & EGA. > > Deferred > - Frank to write up and send to the list a one page summary of > the authorization call-out proposal. > (April 24 call, postpone until June 14) > - Jay check and find out relatively small funding to Globus > to develop document on their security work (April 6 F2F) > - Hiro to schedule a discussion in the OGSA F2F after the > converged specs drafts are released to discuss which sets of > specs to use within OGSA. (April 4 F2F) > -- Michel <dot> Drescher <at> uk <dot> fujitsu <dot> com Fujitsu Laboratories of Europe +44 20 8606 4834

the direct link to the minutes for June 1st is different, as GridForge has been updated: http://forge.gridforum.org/sf/docman/do/downloadDocument/projects.ogsa-wg/do...
Wow! Have gridforge URLs got longer after the upgrade? Good thing we have email to pass these things around! Imagine writing them out by hand... Steven -- ---------------------------------------------------------------- Dr Steven Newhouse Mob:+44(0)7920489420 Tel:+44(0)23 80598789 Director, Open Middleware Infrastructure Institute-UK (OMII-UK) c/o Suite 6005, Faraday Building (B21), Highfield Campus, Southampton University, Highfield, Southampton, SO17 1BJ, UK

We have created a shortcut tool. So, you will be able to create a shortcut like http://forge.gridforum.org/short/ogsa-wg/latest-notes and send that around - like tinyurl etc. We are currently migrating that tool from testforge, should be running tomorrow or so. Thanks for beeing patient ;-) Cheers, Andre. Quoting [Steven Newhouse] (Jun 08 2006):
the direct link to the minutes for June 1st is different, as GridForge has been updated: http://forge.gridforum.org/sf/docman/do/downloadDocument/projects.ogsa-wg/do...
Wow! Have gridforge URLs got longer after the upgrade? Good thing we have email to pass these things around! Imagine writing them out by hand...
Steven
-- "So much time, so little to do..." -- Garfield

Hi Andre: Any hope for a backward URL compatible tool? (I have an excel sheet with about 60 URL's all pointing to various comments made during the comment priod.)(Sorry not in OGSA but in another group...) I can compromise by stating that the URL's are defunct but seems to be a pity. Best Regards Toshi
We have created a shortcut tool. So, you will be able to create a shortcut like
http://forge.gridforum.org/short/ogsa-wg/latest-notes
and send that around - like tinyurl etc. We are currently migrating that tool from testforge, should be running tomorrow or so.
Thanks for beeing patient ;-)
Cheers, Andre.
Quoting [Steven Newhouse] (Jun 08 2006):
the direct link to the minutes for June 1st is different, as GridForge has been updated: http://forge.gridforum.org/sf/docman/do/downloadDocument/projects.ogsa-wg/do...
Wow! Have gridforge URLs got longer after the upgrade? Good thing we have email to pass these things around! Imagine writing them out by hand...
Steven
-- "So much time, so little to do..." -- Garfield
------- NEC 中央研究所 主席技術主幹 中田 登志之 Toshiyuki Nakata Executive Chief Engineer Central Research Laboratories NEC Corporation +81-44-431-7653

Yes, we are working to get URL backward compatibility in place. That might take a couple of days though, and its tough to say for what percentage of URLs it will work - the URL mapping scheme is fairly complex, unfortunately... :-( Cheers, Andre. (sorry for off topic reply on list) Quoting [t-nakata@cw.jp.nec.com] (Jun 08 2006):
Hi Andre: Any hope for a backward URL compatible tool?
(I have an excel sheet with about 60 URL's all pointing to various comments made during the comment priod.)(Sorry not in OGSA but in another group...) I can compromise by stating that the URL's are defunct but seems to be a pity.
Best Regards Toshi
We have created a shortcut tool. So, you will be able to create a shortcut like
http://forge.gridforum.org/short/ogsa-wg/latest-notes
and send that around - like tinyurl etc. We are currently migrating that tool from testforge, should be running tomorrow or so.
Thanks for beeing patient ;-)
Cheers, Andre.
Quoting [Steven Newhouse] (Jun 08 2006):
the direct link to the minutes for June 1st is different, as GridForge has been updated: http://forge.gridforum.org/sf/docman/do/downloadDocument/projects.ogsa-wg/do...
Wow! Have gridforge URLs got longer after the upgrade? Good thing we have email to pass these things around! Imagine writing them out by hand...
Steven
-- "So much time, so little to do..." -- Garfield
------- NEC ?$BCf1{8&5f=j!!<g@J5;=Q<g44 ?$BCfED!!EP;VG7 Toshiyuki Nakata Executive Chief Engineer Central Research Laboratories NEC Corporation +81-44-431-7653
-- "So much time, so little to do..." -- Garfield
participants (5)
-
Andre Merzky
-
Andreas Savva
-
Michel Drescher
-
Steven Newhouse
-
t-nakata@cw.jp.nec.com