- ogsa-d-wg - lists.ogf.org

RE: [ogsa-d-wg] OGSA-D telcon agenda for June 8th - Security; Overall Architecture
by Dave Berry 07 Jun '05

07 Jun '05

This message contained a copy-and-paste mistake: "18th May" should of course read "8th June". Dave. > -----Original Message----- > From: owner-ogsa-d-wg(a)ggf.org > [mailto:owner-ogsa-d-wg@ggf.org] On Behalf Of Dave Berry > Sent: 06 June 2005 21:28 > To: ogsa-d-wg(a)gridforum.org > Cc: ogsa-wg > Subject: [ogsa-d-wg] OGSA-D telcon agenda for June 8th - > Security; Overall Architecture > > Dear all, > > This week's telcon will be on Wednesday (18th May), at the > usual time of > 8:00am PDT / 11:00am EDT / 4:00pm BST / 5:00pm CEST. > > PIN for all calls: 632 065 > > UK Dial In: 0845 245 0224 > US Dial In: 1866 838 0046 > International Dial In: +44 1452 542309 > > > Here is a provisional agenda for this week. > > 1) Early discussion (5 min) > Note taker assignment > Roll call > Minutes approval (http://tinyurl.com/88233) > Agenda bashing > > 2) Action report (5 min) > > - Dave to approach transaction RG re GGF session. > - Peter to write a first cut at the Storage section of the > architecture > document [Done] > - Dave to try to arrange data transfer discussion > - Allen to cut and paste material into document before F2F [Done] > - Dave to forward final F2F meeting info [Done] > - Dave to mail round draft F2F agenda [Done] > > 3) WG status (5 min) > > - Trackers > - GGF working drafts > - GGF session plan > > 4) Security requirements for data grids (20 min) > > 5) Overall architecture (20 min) > > 6) Wrap up (5 min) > AOB > DONM > > > Dave Berry > Research Manager, National e-Science Centre > 15 South College St., Edinburgh > Tel: +44 131 6514039 > >

1 0

Security issues for data services
by Dave Berry 06 Jun '05

06 Jun '05

All, At the London meeting we agreed to discuss security issues at next Wednesday's telcon, and to mail round thoughts in advance. Many of you know far more than I, but I thought I'd send round some naïve thoughts to kick off the discussion. Please correct and develop these comments. Dave. Access to data elements requires authorisation, possibly at the level of each individual element. Depending on the data model, this level may be finer-grain than the level of the resource. E.g. if the resource is a file system, the access control will be at the level of individual files. Furthermore, in a database system, the access control will be at the level of individual tables and/or attributes; as such the access may depend on the content of a particular query. Some types of data have strict privacy policies that restrict the queries that are allowed. These restrictions may apply to sets of queries, so whether a query is permitted may depend on previous queries coming from the same user. Replication services need to enforce common security levels for the replicas. This may require replicating the security metadata. Federation services need to access data in the federated resources. This presumably requires some federation of the security model. Users may want to restrict other people from seeing which queries or commands they are sending. This may affect the logging functionality of the service as well as the security of the transmission channel. Users with confidential data want assurance that their data will not be read by other users or administrations of a server. They want assurance that the services or executables invoked on the data are the actual services or executables expected (as opposed to trojans, etc).

4 3

OGSA-D telcon agenda for June 8th - Security; Overall Architecture
by Dave Berry 06 Jun '05

06 Jun '05

Dear all, This week's telcon will be on Wednesday (18th May), at the usual time of 8:00am PDT / 11:00am EDT / 4:00pm BST / 5:00pm CEST. PIN for all calls: 632 065 UK Dial In: 0845 245 0224 US Dial In: 1866 838 0046 International Dial In: +44 1452 542309 Here is a provisional agenda for this week. 1) Early discussion (5 min) Note taker assignment Roll call Minutes approval (http://tinyurl.com/88233) Agenda bashing 2) Action report (5 min) - Dave to approach transaction RG re GGF session. - Peter to write a first cut at the Storage section of the architecture document [Done] - Dave to try to arrange data transfer discussion - Allen to cut and paste material into document before F2F [Done] - Dave to forward final F2F meeting info [Done] - Dave to mail round draft F2F agenda [Done] 3) WG status (5 min) - Trackers - GGF working drafts - GGF session plan 4) Security requirements for data grids (20 min) 5) Overall architecture (20 min) 6) Wrap up (5 min) AOB DONM Dave Berry Research Manager, National e-Science Centre 15 South College St., Edinburgh Tel: +44 131 6514039

1 0

RE: [ogsa-d-wg] Security issues for data services
by Peter Kunszt 06 Jun '05

06 Jun '05

Bill, we disagree on some points, let me elaborate.. > -----Original Message----- > > I disagree that replication services need to enforce common > security levels for replicas. If I have read access to a > file, I can copy it and set its access to whatever I want. > If that is important data, it is assumed that since I have > read access I will take care of it. A community may wish to > impose consistent access rights across replicas, but that is > a policy issue not something inherent in replication services. > Replicating access rights is in the interest of the job submission system: if a file is replicated to site A, the job submission system assumes that it has the same permissions as elsewhere. If the file at site A is not readable for the job, then it fails, because of the file permissions were not replicated along with the content. If you degrade security consistency to a VO policy, then why would any VO that needs this security consistency trust the Grid infrastructure with their data? Knowing that the infrastructure will not enforce consistent security semantics across sites means to many applications relying on secure data access (sometimes due to legal issues) that the whole infrastructure is unusable to them. Since sites have the last say and VO services are not part of the site security infrastructure, it is not possible to enforce security semantics through VO policies alone (at least this is one of the conclusios we came to in EGEE). This is a crucial point in the data architecture: Do we intend to offer a consistent grid-wide security to the applications or not? Where does VO policy start and Grid/site security stop? How do they interact? Our strong belief is that the infrastructure has to be able to offer strong security. It may be that some sites decide not to support it - but then the VOs who rely on strong security should be able to choose not to include that site in their list of supported resources. > As to the federated security model, I again dont think that > is necessary, if I access n different sites, I have to do n > authentication and authorization checks and if any one of > them fails the access fails. > This does imply some things about uniform identity, they > all trust the same CAs, even that they are all using the same > security mechanism. It would also be a major pain to debug > access problems, particularly if the system is dynamically > choosing the resource so you dont even know where are > accessing things. I suppose it might be possible to query > your rights across all the resources and present a federated > access rights list that was the least common denominator. i don't quite follow here.. the user always should know where and why an access was denied, and a site should always keep a log of access data (audit trails). > > The idea of users not wanting anyone, including admins > knowing what they have stored is a security concern. How do > we know that they are not storing stolen top secret > information or that they are actually running bomb design > software. I dont subscribe to this, but I have heard this > argument from security folks before. Biomed applications want to protect their patient's privacy, as they are required to do BY LAW. therefore they need to be able to encrypt files on the storage. If one does not agree with this policy, then it should be advertised in the storage policy that such sensitive applications would not use the resource. There may be conflicting legislations, we have to be able to deal with it. That can olny be done by properly advertising the security semantics of the Grid Sites and VO services.. Peter & Akos > > Bill > > -- > William E. Allcock > Argonne National Laboratory > Bldg 221, Office C-115A > 9700 South Cass Ave > Argonne, IL 60439-4844 > Office Phone: +1-630-252-7573 > Office Fax: +1-630-252-1997 > Cell Phone: +1-630-854-2842 > >

1 0

Notes from the London OGSA-Data face-to-face Meeting.
by Mario Antonioletti 01 Jun '05

01 Jun '05

OGSA Data face to face - 26/05/05 ================================= Notes: Mario Antonioletti Attendees: Mark Morgan [MM], University of Virginia Hiro Kishimoto [HK], Fujitsu Andrew Grimshaw [AG], University of Virginia Stephen McGough [SMcG], LeSC Ann Chervenak [AC], USC/ISI Bill Allcock [BA], ANL Peter Kunszt [PK], CERN Dave Berry [DB], NeSC Mario Antonioletti [MA], EPCC Neil Chue Hong [NCH], EPCC Stephen Davey [SD], NeSC Michael Drescher [MD], Fujitsu Jay Unger [JU], IBM Andreas Savva [AS], Fujitsu Susan Malaika [SM], IBM (on the phone) Tom Maguire [TM], IBM (on the phone) Summary of salient points: * ByteIO needs a truncate operation to avoid the truncAppend with 0 bytes offset. * In ByteIO truncate needs an offset from which the truncate takes place. * In ByteIO consider stating whether data is coming from a stream (or not). * Requirement to discuss a streams interface in a future telcon (either ByteIO of data WG). * In the data replication section the distinction between replication and caching needs to be made. * Talk to the JSDL to see if the data movement descriptions can be used to describe data movement without over complicating JSDL or requiring them to become a full blown work flow language. * Move away from using the volatile/temporary, permanent and durable space classification in the storage management section, possibly with QoS and lifetime. Actions: [PK] Produce a new draft of the storage management section. [SD] Write up some of the use cases (for an appendix?). [AG] Produce a picture of the OGSA Data Architectural stack. [BA] Go through the data transfer section. Presentations given at the meeting are available from: http://forge.gridforum.org/docman2/ViewProperties.php?group_id=150&category… Where these are available at the time of posting I have put explicit links to the corresponding talks. +--- MM talks about ByteIO. Presentation: http://forge.gridforum.org/projects/ogsa-d-wg/document/ByteIO_status_and_in… - Need for this has been expressed by several groups. - Want something simple. - ByteIO is an interface, not a service. HK: in BES had a discussion about services/interfaces. If an interface supports a capability or metadata in support of that interface then it is a service. AG: yes, define the interface but also state resource properties - when taken together this is a service. MM: I don't view that way. That is not a service. AG: does it have portTypes we can agree on and resource properties? The implementation is something else. MM: We want it to be composable. Do not want for it to stand on its own. It will have properties. PK: the client and service API do not have to be the same - you said - nevertheless to implement an interface the service should allow the implementation to provide both. ... HK: Is this WG going to based on the basic profile? MM: yes. MM shows some UML of the interface based on what was presented at GGF. ... BA: why not have a truncate? It's a hack if you want to truncate and append 0 bytes to achieve the same thing. MM: not going to fight that. PK: want to keep the service side API as simple and as small as possible and have the richness in the client side API. BA: have a concern that there is no open and close in this ... realise that it is intentional. AG: the assumption here is that you will use RNS to open these files. Once you have the name then you do not need to open it - that is what basically gives you the inode in Unix. The client side will open a file by finding the name - the security aspects is out of scope. MM: open for read and open for write is a client side issue ... BA: it is authorisation ... AG: but that will be addressed at the client side. BA: so can only determine what my level of authorisation by trying it out and seeing if it fails? AG: yes ... BA: do you have a stat? MM: yes. HK: does the truncate need an offset? (truncate to a point). MM: no. HK: POSIX does have an offset. How does it map? MM: that is a good point. ... BA: is what you envision here is that I send a SOAP message - and ask for 1Mb of data - how does it do that? MM moves on to the Bulk Data Transfer slide. PK: how much data are you talking about? MM: whatever the client asks for. PK: for large amounts of data you also need to concern yourself with the network and manage the network resource. AG: trying to define a simple API for block reads. Different people can choose to implement that in different ways. BA: you don't have GridFTP in your list of protocols .... MM: not limiting the data transfer protocols ... BA: I have a system that can do that today ... want to make sure that it fits. AG: this is not an ftp based data transfer ... we are trying to come out with a basic interface that offers basic POSIX like operations ... you can use GridFTP to implement this ... ... BA: what I see is 150 ms round-trip, 3 s of deserialisation time, then it opens a GridFTP session, brings back the data and then it closes the session as you do not have support for sessions. Your performance is going to be horrid. DB: would the end point not be created when you open the GridFTP session which has that interface ... BA: so you save on the session start up but you still have the send a message and get the block back ... what is the most common usage scenario? AG: there will be other pieces or other libraries that it will interact with that will be able to emulate NFS, CIF, etc which will manage coherence and other such stuff.... BA: you cannot ignore the use case where you take the POSIX interface and try to do that on a remote file. AG: there will be all sorts of latencies. MM: we have this interface that works with various systems ... BA: just want to make sure that a GridFTP is taken into account ... as long as we can fit this in ... NCH: there is going to be discussed in the spec. PK: If you talk about GridFTP then someone will implement on top or below GridFTP? MM: trying to provide a simple interface to allow people to talk to files. If you have high performance requirements you may or may not want to use this. This is a general way of doing things. BA: this is an optional interface ... if you guys want to come up with this and if it can be implemented on top of GridFTP then your performance will suck but we may be able to work round that and try to optimise it. There is nothing that prevents it from bypassing this and using another mechanism. MM: absolutely. DB: but should take into account if there are things that will make it performant. BA: there will probably be a SOAP control channel for GridFTP in the near future. AG: that is similar to an issue here - you do not want to use SOAP to do the bulk control transfer. Avaki did this using SOAP for the control channel and sockets for the data transfer. MM: not all of the options offered here are right for everyone. Any WS-* that can be applied to the data transfer. Added a QName at the end of the functions that allows the transfer mechanism to be specified. DB: the problem with in-line being the default for the transfer is that it will crash the server when too much data is required. PK: but the implementation will protect you from this. ... BA: how do you know the encoding of in-lined data? MM: we will profile what that means ... BA: Could offer RFT. ... MM: for properties will start off with POSIX stat and add on to that. In Linux /proc has to deal with a lot of the same issues. DB: why would you worry about the file create time? MM: you may or may not want to worry about this... PK: does this not come from RNS? AG: RNS may not have that information. Would rather keep this metadata, at least logically, with the file as in the naming scheme you might have different paths to this and you would want the metadata to only come from one destination. PK: maybe it should be both. If you have data at the data resource where can I get it from a replica.... AG: the EPR that is kept in the directory structure - don't recall if there can be multiples of the same thing ... I don't think that replica management has been addressed in that ... RNS would have an EPR pointing to some service doing the replication as opposed to pointing it to the files themselves. ... DB: The point I was trying to make earlier is that although all these Properties may be in the EPR, they don't have to be held in the ByteIO interface Suppose I want to know whether the data resource is writable. AG: that depends on who you are ... some things are fundamentally unwritable but some depend on who you are. PK: what are the properties for other data resources? For instance a BLOB in a data resource. NCH: you do not have to necessarily know and there are other interfaces that will hold this. ... MM goes on to talk about use cases. File use case. PK: would it make sense, for streams, to specify in the read that it is not seekable? MM: assuming the interfaces presented what would it give you? PK: it would be much cleaner for a client. MM: reason why we shy away from streaming in this WG as we are trying to satisfy what people need right now. AG: I agree with what peter is saying - if I read I just consume it and the next person will read the same data. This would not be true for streams. NCH: it is a simplification of the interface. AG: If I want to cat a file that is going out to a service ... BA: there is always the debate as to whether you ignore capabilities you cannot perform on the stream or fault them ... PK: does it make sense to explicitly state that you are a stream? It makes the client's life easier. AG: extending the interface makes sense but, playing devil's advocate, if wanted to cat do I have to be aware that there are streams? PK: you can write cat in different ways - can cat with a stream or you can do the cat yourself. ... Happy with simplified semantics. AG: The stream interface needs to be discussed in a telcon soon. ... DB: the sensor use case was basically covered by what MM said about streaming in his discussion. +--- NCH takes over to discuss a DAIS use case. Presentation: http://forge.gridforum.org/projects/ogsa-d-wg/document/DAIS_Use_Case/en/1 ByteIO in this instance is treating data as a virtual file. NCH discusses a use case where data to be entered into a data resource is conveyed to the data service using the ByteIO interface. PK: in GSM - if you put stuff in storage - you have to say how much data you are going to put in. Also, what seems to be missing here is your Virtualization description of how you access the data, the structure - is there not a need to describe this. In the insert you would have to state the format ... AG: ByteIO is working as an HTTP GET. BA: this should be an execute insert. NCH: this is not a use case where you treat a database as a file. Some discussion as to whether pushing data to a data service and then put it in the database. Not a model that is currently supported by DAIS. For the "complex insert" use case. PK: The pull model is simpler as a service provider but from the client side it is more difficult as you do not have a service to serve the data. For medical imaging they pull an image from the database, they do some processing and then want to push the image back to the database. BA: if they pulled the data out of the database they should be able to push the data back out to the database. ... Moving on to the "Simple copy" use case. BA: why would you do this using ByteIO? NCH: 'cause I needed a use case. PK: if you do copying around then you need to do it at the transfer level - you need to manage the storage and manage the network. NCH: there are implementation layers that are not explicitly shown here. MM: ByteIO telcons are every second Tuesday at 11 easter time, 4pm UK time. ... +--- DB puts a copy of the agenda for the remainder of the meeting up. Some agenda bashing ensued and a slightly modified agenda was agreed for the rest of the meeting. DB gives a quick synopsis as to what went on at the OGSA face to face earlier on in the week and the data issues that were presented to the group (all in the slides). Presentation: http://forge.gridforum.org/projects/ogsa-d-wg/document/OGSA-D_status_and_in… A brief summary of what has been put in each of the sections by the corresponding authors. +--- MA gives a brief overview of what he has put in relation to data access in the OGSA Data Architecture straw man document. Presentation: http://forge.gridforum.org/projects/ogsa-d-wg/document/Access_section_statu… A discussion follows on what is the scope. AG: client should be able to manipulate the basic service. May also want clients that access higher level services, e.g. NFS and CIF. We have to be clear of as to what layer of the stack we are talking about. Some folks will want transparency while other people will want the performance level that talks to "bare" services. PK: can use this to structure the document. DB: the intention has always been to have a document that talks about scenarios. AG draws a picture on a white board: [Powerpoint version of these diagrams subsequently drawn by DB and made available at http://forge.gridforum.org/projects/ogsa-d-wg/document/Architecture_drawing… ] +-------+ | client| +-------+ | libs | +-------+ | +----------------+ +--------->|Access Services | (Out of scope but | |(NFS, CIF) | it is a use case) | +----------------+ | | +--------------------+ +--------->|caching/replication | (in scope) | +--------------------+ | | +---------+ +--------->|transport| (in scope) | +---------+ | | +--------------------------+ +--------->| bare services, files,etc | (in scope) +--------------------------+ Consumers at the top. Producers at the bottom of the stack. A consumer at the top can talk to any of the layers below depending on the performance/abstraction required. DB draws a picture of his conception of the architectural stack: +-----------------------+ | Federation | +-----------------------+ | Replication/Caching | +-----------------------+ | Access (client access)| +-----------------------+ | Storage | +-----------------------+ | Transfer | +-----------------------+ | Data + Description | +-----------------------+ DB noted that this is more an axis of increasing capability rather than an architecture per se. Discussion followed regarding what federation means and whether this should include transformation. DB: maybe at the end of each section we should have a diagram of the architecture thus far. JU: have a concern about that ordering - replication and caching can be viewed as the replication and caching of the individual sources or of virtualised objects. There is no strict layering or you have to assume one. In IBM have decided that replication and caching takes place above virtualisation. That ordering gives you more flexibility than the other way round. Also talk about federation and transformation being infinitely recursive. ... Discussion follows as to whether virtualisation is above or below the replication and the different pros and cons that the different choices entail. ... +--- AC gives a summary of the data replication section. Presentation: http://forge.gridforum.org/projects/ogsa-d-wg/document/Replication_section_… AG: does copying involve some or all of the data - does that include caches? AC: we do include subsets. JU: depending on the source type there are a number of ways to establish subsets. AC: yes ... have not made a clear distinction of replication and caching. JU: a way I can look at is that replication is an explicitly planned and meta data managed activity - someone has explicitly created two or more copies and established what the relationship between them is through metadata whilst caching the data movement is an automatic and temporary instance. BA: to me, it's the scoping and visibility of it. Caching is not visible to you. AG: but if you make caching first class citizens then you can tie the two mechanisms together. JU: so caching would have no explicit RNS name and lifetime. caching is an exploitation of replication that has no RNS name or explicit lifetime. AG: but there will be users who can/want to see that. JU: It seems like it will be possible to define caching as a limited scoping of replication. DB: I made a distinction between replication and caching ... whether the primary source knows of the cache. PK: they both use the storage resource to do the caching. JU: want to explicitly define the subset relationship between caching and replica management. Did you add the peer-to-peer model? AC: not as well defined, need to flesh this out. how to name replicas and partial replicas? JU: RNS. AC: the RNS spec is all hierarchical ... AG: I personally would not do it in RNS. I would create a WS-Name that says that this is this file and the implementation would know the replication. What you have been discussing - is there an interface or is this a proposal? So for consistency you could say Unix consistency which, when you wrote to a catalogue, it would write through. AC: want to be able to define consistency models that could be supported or the service states that it does not support that model. AG: to fit inside OGSA the names should be RNS, the abstract names would be WS-Names and the low level addresses would also be WS-Names with different IDs. HK: the third one should not be an address? AG: the third name can be an address ... you could say that it is an EPR and not a name. PK: RNS is scoped for humans, the replica discovery would be to get the replica - what are the semantics? If you make the comparison to a file system - one is mutable and one is not? AG: The first abstract name would be similar to an inode. It depends on whether you want replication to be visible to the client. PK draws a picture on the white board: +-- -+ / | / | Human name ---> "inode" (GUID) ---- +- Replicas \ | \ | +-- -+ User assigned System assigned sys/user assigned AG adds EPR < To:URL AbstarctName Resolver:EPR > How do you resolve the GUID to a resolver? Can use an AbstractName which needs to be resolved that then allows you to pick the right replica. JU: the back end could be WS-Names. WS-Names are EPRs. If you want to make the EPRs visible then you map these to human names. AG: we did it both ways in legion. Could make both visible to the client which is easier to implement or can only make one version visible through a guid like thing and make that late binding which is harder to implement. ... AG: there is a versioning model that the replicas can check for consistency in a lazy way ... AC: we did not specify it to that level. AG: used a consistency window in Avaki and has worked that well. AC: you could do it both ways. PK: mentioned that replicas are created via at the replica factory and then specify the consistency at the creation point - does the factory then manage that? JU: it should be an unimportant as to who manages it. PK: as the client I might care. JU: but you talk to the EPR so you don't care who you talk to. The URL may not point to the factory - it could talk to another service. PK: if I create a new replica where do I go? JU: the factory could have talked to another service managing the replication and got it to create the replica (as an EPR) and sent it back to you or the factory could be doing the actual creation but this is irrelevant to you - you do not need to know. ... AG: could have a replica manager in the middle or it could all be separate. JU: if you view the factory as a management interface could have an EPR with only the management interface - could then use the human readable name to actually access the replica. DB: (to Ann) how do you see this chapter moving to describe specific interfaces? AC: Don't have an answer to that. Allen may have a better view on that. ** Lunch +--- DB introduces the next session on Data Transfer. No slides for this part of the agenda. There may be a link in to infod on this. There are a number of issues - protocol selection - descriptions of source/sink interfaces - transfer controlled by a separate service in every case or only a subset of cases? - transferring bytes with no interpretation BA: get a strong argument for me - for data transfer you just transfer bytes period. ... DB: when setting up a pipeline you may do some negotiation. BA: that is a higher level thing. It ultimately all translates to using a socket. DB: but the architecture has to translate to the picture that AG drew. BA: there needs to be a distinction on what you are building on. DB: currently have a byte level view and a structural level view ... Tried to separate the operation level parameters - need to see what is specified in the source interface and what specifies the transfer. BA: at what level are you talking about? DB: all levels. BA: so the interface looks the same at all levels? DB: no ... BA: when you do this negotiation there should be the inclusion of a schema that you use. ... Malcolm and I have talked about negotiating the protocol on locale and if you are in the same container then all you need to do is send the pointer to your buffer. DB: so how does this separate from scheduling? BA: would hope that a lot of these things are hidden under the covers as you negotiate with each other. .... AG: if you pass a pointer then you would have to pass a copy ... it breaks the web service model. BA: Malcolm would not be happy with that answer ... AG: but if you are going to use Web Services ... BA: maybe not a good choice ... the pointer may not work but the content exchange model based on local would be useful AG: I would agree but I would think that it is out of scope. DB: you could negotiate .... if memory-to-memory copy is not part of the allowed protocol .... AB: the hard part of this is how to figure out locale ... DB: but locale has already been figured to be an interesting property to have. Other issue is on how to link this to infod. The infod uses a publish/subscribe model. At GGF13 pushed this to see if a data transfer. Looked at a use case... SD: can't you just use WS-Addressing to do this. DB: I don't know if other people have used WS-Addressing for this. PK: in the storage resource manager there is a copy that does data transfer. It internally manages the data transfer. Discussing how these additional things are taken into account in EGEE. ... DB: you come from the large data/large data movement ... you mentioned the linking of that into scheduling. OGSA have been asking us what information from data should go into scheduling and this could be something. PK: in EGEE want to associate as much as possible in the computation and data areas so that you do not have to do the same thing twice. AG: have the same in BES we call these things activities, could be a computation or it could be a data resource. Try to get as much info on these to manage decisions. PK: eventually you map into whatever transfer service you have access to ... then you link into a scheduler. AG: could also link to a transformation.... PK: these transformations are coupled into the data transfer .... DB: encryption and compression are explicitly mentioned in the document. ... PK: you can view any computation that has input and output data as a transformation. The Griffin project do this - no diff between this and encryption. AG: that was where it was in Avaki... ... Discussion as to whether the role of an operation is expressed in the operation name or if it is an attribute. Need to check whether infod have looked at the scheduling to transfer large amounts of data. ... DB: Is it the case that you first need a mechanism to negiotiate and define the transfer, and then a separate mechanism to actually perform the transfer (possibly after some scheduling phase)? ... Talk about the different levels of encapsulation. ... PK: needed something that can manage the data transfers and book the bandwidth. (to BA) what is a suitable interface for data transfer? AB: there is no obvious transfer interface out there... that's why we used the XIO interface to GridFTP ... synchronously .. [ Note from DB: this misses part of the discussion. PK and BA agreed that an API for async transfer was needed. They said that there wasn't an obvious API for synchronous transfer. ] DB: Do we need an interface for synchronous transfer, provided we have one for async? AG: In Legion if you had read from one object to write to another it would go directly between these objects, no intermediary. DB: so is there a need for one? ... PK: submit, cancel, suspend, ... have analogies to data. AG: a limited JSDL job with no execution. BA: do not follow JSDL but the XML for the GRAM job contains the whole RFT description for a job transfer - exactly what would happen with no execution. AG: I don't remember the richness of the JSDL data transfer capabilities.... BA: would it be possible to put the profile in the job description schema? Could we say that as part of the job you have to describe the staging? Can you say the mechanism that is going to be used for movement? So if you use a given movement you include a schema ... SMcG: to deal with the simple case you can use a URI. Thought people would want more complex types so we put in an xsd:any to allow people to put the information you want in. Unfortunately most tooling does not check what you put in against any schema submission. PK: so it might be worthwhile to go through JSDL and possibly see if it requires to be extended. AG: this is one of the things that the BES is looking at to see if it can be used and made friendlier. ... Now that data transport - as in staging - is back in scope ... JU: the current BES container model is a 3 phase execution: stage, execute, de-stage and the stage/de-stage spec in JSDL identify any sources and/or sinks. AG: you could just send in jobs that just have the stage in or just an execute or just the stage out so you could use that for data transfer. JU: Don't want to allow BES to get more complicated as a work flow job. If you want more complicated interactions then you have to architecture something else or use something like BPEL. BA: but if you want to treat transport as a job itself then, as long as JSDL is rich enough, then you can pass this to GRAM and invoke RFT using JSDL. JU: that is all useful but the problem is that if you want to schedule a transfer but want to guarantee that that takes place before or after some event then you can't do this in JSDL .... you can use a choreography to achieve this or through a third party service but I do not want to make JSDL more complicated ... .... Discussion as to whether BES can be used to describe the data transfer. .... AG: there is a need for this. MM: surprised that the GridFTP parameters cannot be put in the URI? ... AG: maybe can use the execution part to do what you are looking for. BA: if you know this is going to be there as a capability you can either decide to break this into three stages and do something else to do the managing but as you have decided to allow me to move data then you need to make it rich enough to allow me to do that. AG: you need to talk to the JSDL people. ... Need to make data transfer a first class citizen. ... ** Break +--- PK talks about the data storage management section that he wrote. He projects a version of his document so no slides. ... In GSM define three different types of spaces (which have semantics): - volatile or temporary space - like /tmp. - permanent space - you expect your data to be kept so requires higher QoS (have backups). - durable space - something in between. This would go into caching. It cannot be removed for an agreed length of time. AG: what about failure? PK: volatile and temporary if it's gone, it's gone. For durable you try and recover it. BA: hate this concept. AC: why not just use lifetime? PK: the concept is there in the interface. To the user this may be more useful. It is probably cleaner to use lifetime management and give them a name. It helps - for instance in temporary space if you give it a file to keep and ask it to be there for a day you then get 0 guaranteed time back (i.e. the file could be removed at any point). You have 2 lifetimes - the guaranteed lifetime and the requested lifetime. Durable would allow pinning on temporary space where you get a guaranteed lifetime. AG: lifetimes may not be appropriate if the machine goes down for a week then it might all get wiped when the system comes back up. PK: durable is only a temporary storage until it moves to another space. AC: in durable it sends you an email if the file is to be deleted? ... BA: for the cached/temporary space the user should understand - don't put it there if it's important to you. The permanent storage then asks for a different policy. It's all just QoS and lifetime management. It then becomes reasonably straight forward. PK: personally I agree with you but other people in the community feel that the semantics are important. I think that this is a mismatch and they should explain to the client what these things mean. AG: why not make it that it calls it permanent storage and just call it temporary space... BA: they don't trust disk space - permanent space is tapes for them ... AC: do we want to put that concept of permanent space in this document? PK: Have the same issue in SRM. ... BA: if you ask for 1Tb of permanent space but you only use 100Mb then you could allow others to use the 900Mbs as temporary space ... this allows you to do that. If the other user then requires the other 900Mbs then the files stored in there just get wiped. PK: do not have lifetime in the document ... should probably add it. Also could add advanced allocation. AG: don't think that you can regard permanent as boolean. You really have a range which have different QoS. Classics are availability, probability of failure, lifetime, .... ... BA: should have a designation as to whether it is a volatile or not - whether I can blow it without your permission or not. ... PK: average latency, cost/Gb ... how do you represent that? AG: saying something is durable depends on your fault model. Does durability mean survivability or something else? PK: might be better to have flag to see whether it is temporary or not? BA: yes, volatile yes or no. PK: whether there is a back-up? AG: what is the latency between it going from disk to back-up. AC: prefer this notation rather than what you have there. Whether it stays in SRM is another issue. ... PK: advance reservation in the GSM - people thought it should not be done. Should it be done in this group? Lots of people do not believe in this ... as long as there is no payment it is difficult to enforce. HK: do you have a use case? PK: all use cases can be re-phrased in other ways. AC: it would be a nice capability. AG: you can do that by calling a system administrator .... it should be a capability. You would make an agreement about storage. PK: you would use WS-Agreement? AG: you could. PK: availability - also QoS: does it support quotas? lifetime management? transfer? Trying to convince people in GSM that things should not only be done in the storage system. In this document the storage could give hints to another transfer service to schedule the transfers. Let it know the files that you want to transfer out will be on disk ... the storage systems have their own staging pools and they have to optimise that. If you have tape you need to do all this. Conceptually the capability it should have is to expose these hints to the transfer layer. HK: I think these are important characteristics but these do not quite match the title ... PK: produced this document very quickly. HK: you also need input data. DB: maybe should put in a different section that states information that is relevant to scheduling. PK: there is also caching. It would be nice to have a concept map. AC: the job scheduler confuses me a little. PK: BES AG: something else other than BES will be doing the scheduling. ... PK: if you have the ability to do reservation then a job scheduling manager would just call these capabilities - have a use case where you have the storage metadata can be used be a scheduler to determine whether it can do the job. AC: the kind of thing that a workflow manager can use. PK: storage reservation ... how do we expose this in terms or a capability of a storage? AG: you can unify these - go to the storage management factory and agree on how much space you will have and for how long. The lease space allows you to extend the reservation, etc you can relate all of this to agreement. PK: up to know what has been said have tried to support the semantics of mass storage systems but could be supported by any object store. Have tried to describe the differences between a file store and a database store. AG: a lot of DBs do their own storage management. Trying to impose yourself between a database and its storage management would be a challenge. JU: trying to use a file system for a DBMS would be a problem but trying to impose yourself between the DBMS and the disk would not. How this is done varies from database and database. BA: it is still writing to disk store. PK: the pattern I'm talking about is that the client would make to the database and reserve some space. JU: it depends how you do this. DBMSs deal with a virtual disk. In lots of NAS and SANs you can request a virtual disk of any size (a block server with a disk). This only makes sense for a small number of databases. PK: this simplifies my life as I can then restrict this section to files. How would I specify it now? AG: trying to do this will complicate your life. PK: so it might be worth throwing out. DB: worth talking to a couple of other folks. JU: SANs deal with a virtualized LAN... AG: this gets you into virtualized SANs.... JU: for grids if there is little penalty for creating a virtualized disk why not use that as opposed to be tied down to file space. AG: Your allocated a block of storage and a handle to it .. JU: do you want to write a handle of that or type it. If it is in a virtual LAN which only understands block I/O. PK: it does not matter in that respect as you get the SURL and translate that to a file handle. If it is a virtual disk then you get ... JU: so it is typed. PK: but you can get back a different type. ... PK: discussion about what the type of data that you are retrieving through the storage - is it a file? My answer that is specific to a protocol. It could be a stream. It does not matter as long as you can talk to it. If you just want to access it through POSIX I/O then that is fine. ... JU: this talking about access to storage .... you can get a chunk of storage and getting a handle you can access through a protocol. You can also get access to management ops that affect that storage. PK: this is about managing storage as a resource - allocating/deallocating... JU: so there is an I/O performance that is associated with the size. PK: one of the parameters may be the latency and bandwidth. JU: if you have an application that is accessing a detector - the nature of that application may be that it needs 200 Mb/s to write the data from the detector but once it is written the other applications may only require 20 Mb/s to access it so saying that you slow it down is fine. AG: that's a QoS issue JU: so all I'm saying is not to restrict yourself to allocation/deallocation... the metadata associated with the storage are broader. AG: that is something that could go into the agreement.... ... HK: using POSIX examples - you have some storage, the user appends to it. The space allocation happened when they accessed the storage .... PK: if you have an app that needs to extend its quota you would have to do that before you started writing to the system. HK: checking when the allocation takes place. ... DB: might be worth moving to a wrap up stage and discuss how to proceed the document. ... Discussion on how to proceed. MA suggests fleshing out AG's stack and possibly using the concept maps. Can also do the individual sections. SD: can talk about overlapping sections... DB: maybe bubble up things from the different section. Add a new section or push them up to OGSA. ... AG: I could try to draw a picture. DB: that would be good. ... DB: aim to submit the present document as is. SD: is it worth putting the use cases as an appendix? MA: can see if you can implement the use cases based on the technology described in the document. AG: also have the BES use cases.... don't think they have been written as yet. ... DB: have volunteers to write the storage management section [PK], write use cases [SD], do a picture of the architecture [AG], revise the data access section [SM], go through the data transfer section [BA]. AG: (to PK) would like to synchronize the work that you guys are doing with stuff coming out of RNS, BES and stuff ... Get people to write what the security requirements that are relevant to data only. +--- +-----------------------------------------------------------------------+ |Mario Antonioletti:EPCC,JCMB,The King's Buildings,Edinburgh EH9 3JZ. | |Tel:0131 650 5141|mario@epcc.ed.ac.uk|http://www.epcc.ed.ac.uk/~mario/ | +-----------------------------------------------------------------------+

1 0

Base_Coduments category renamed to Working Drafts
by Allen Luniewski 31 May '05

31 May '05

In keeping with GGF conventions, I have renamed the "Base_Documents" category to "Working Drafts". I apologize for any confusion I may have caused by the previous (name, or be causing by this renaming. Allen Luniewski IBM Silicon Valley Laboratory San Jose, CA USA

1 0

Fw: Srawman Architecture Document V.5 Uploaded to GridForge
by Allen Luniewski 31 May '05

31 May '05

I have updated the V.5 version with a new Storage chapter courtesy of Peter Kunszt: /projects/ogsa-d-wg/document/Strawman-Architecture_V.5/en/2 Barring emergency changes, I do not intend to update the document again before GGF-14. We should use this version of the strawman architecture document as the basis for discussion, comment and changes in our interactions on this DL and in our teleconferences for the next month. After GGF-14 we should start incorporating changes leading to the next major version of the architecture. Allen ----- Forwarded by Allen Luniewski/Almaden/IBM on 05/31/2005 02:45 PM ----- Allen Luniewski/Almaden/IBM 05/26/2005 10:46 AM To <ogsa-d-wg(a)gridforum.org> cc Subject Srawman Architecture Document V.5 Uploaded to GridForge The latest version of the strawman architecture document has been uploaded to Grid Forge at: /projects/ogsa-d-wg/document/Strawman-Architecture_V.5/en/1. The major changes in this version are the addition of drafts of the Data Description and Metadata sections supplied by Simon Laws. This version will be submitted to GGF as our official GGF-14 document.. I will temporarily hold the write lock. If you want to update the document, please contact me and we can pass the lock. Allen Luniewski IBM Silicon Valley Laboratory San Jose, CA USA

1 0

OGSA-D telcon schedule & preparatory work
by Dave Berry 30 May '05

30 May '05

Dear all, At last week's f2f meeting we decided the following timetable for OGSA-D telcons until GGF14. For some of these we are requesting participants to prepare material in advance - most notably, at next week's telcon we will be discussing security requirements for data grids and it would be very useful if you could circulate your thoughts beforehand. We plan to collect these requirements and present them to the OGSA security design team and other interested parties. * Topics June 1st: No telcon this week. June 8th: 1. Security requirements for data grids; participants to circulate notes in advance 2. Overall architecture June 15th: To be decided June 22nd: 1. GGF preparation; speakers to have draft slides ready for review 2. Data transfer June 29th: GGF14 (therefore no telcon) Dave Berry Research Manager, National e-Science Centre 15 South College St., Edinburgh Tel: +44 131 6514039

1 0

Srawman Architecture Document V.5 Uploaded to GridForge
by Allen Luniewski 26 May '05

26 May '05

The latest version of the strawman architecture document has been uploaded to Grid Forge at: /projects/ogsa-d-wg/document/Strawman-Architecture_V.5/en/1. The major changes in this version are the addition of drafts of the Data Description and Metadata sections supplied by Simon Laws. This version will be submitted to GGF as our official GGF-14 document.. I will temporarily hold the write lock. If you want to update the document, please contact me and we can pass the lock. Allen Luniewski IBM Silicon Valley Laboratory San Jose, CA USA

1 0

Srawman Architecture Document Uploaded to GridForge
by Allen Luniewski 23 May '05

23 May '05

The latest version of the strawman architecture document has been uploaded to Grid Forge at: /projects/ogsa-d-wg/document/Strawman-Architecture_V4.0.1/en/1 The major changes in this version are the addition of drafts of the Replication and Storage sections. In addition, minor editorial changes have been made. As per last week's teleconference, I will continue to hold the write lock on this document. The plan is to upload a new version based upon changes coming out of this week's face to face meeting. Allen Luniewski IBM Silicon Valley Laboratory San Jose, CA USA

1 0