What is the process for addressing the concern that I raised on 10/16 (enclosed below)? I can of course wait for the public comment period to express concerns about the specification, but I am trying to engage. Ian.

...

Darren:

I would like to argue against your proposed operations on the grounds of fragility and scalability. Your operation definitions require that a client keep track of the set of activities to be monitored and controlled. That's a big burden to place on the client.

I suggest (as we have also suggested in earlier communications to BES-WG) that we should instead allow the user to specify a set of activities that are to be monitored or controlled in terms of their properties, not names. E.g., "activities that belong to me", "activities that involve executable Foo", "activities that have been running for over 2 hours."

A natural way of modeling this is to represent the set of activities associated with your jobs as a WS-ServiceGroup Service Group, and then use queries on the service group to specify the activities to which an operation applies.

Regards -- Ian.

At 08:52 AM 10/26/2005 -0600, Darren Pulsipher wrote:

I have spent some considerable time with the document. I know far more than I planned, but it was good time spent. I think we should discuss these items in our meeting on Thursday. I have posted some changes to the document but would like to discuss these items before I make these changes to them.

There are some fundamental problems/questions that we need to resolve.

1. How do we resume from where we left off. There is no Resume anymore so we are putting the responsibility to the submitter or controller to keep track of states. We can only use RequestActivityStateChanges to suspend something and if I want to suspend 1000s of activities that means I would need to first do a GetActivityState save the states and then call RequestActivityStateChanges without any of the activities changing state. That is not going to happen. So I propose we do the following: - Add the following interfaces: SuspendActivites(WS-Name[] activityIdentifiers) ResumeActivities(WS-Name[] activityIdentifiers)

Or we add one interface PerformOnActivites("Suspend" | "Resume", WS-Name[] activityIdentifiers)

2. Another problem is how do we terminate an activity. The States that are available are "Terminated" and "ShuttingDown". According to the state net the activity is moved to the "ShuttingDown" and then to "Terminated" so requesting RequestActivityStateChanges for activities with "ShuttingDown" means it should move to the ShuttingDown state but it will move the activities to the "Terminated" state. This can be very confusing. So I suggest we add another interface. - Add the following interface: TerminateActivities(WS-Name[] activityIdentifiers)

Or add another possible argument to the interface. PerformOnActivites("Suspend" | "Resume" | "Terminate", WS-Name[] activityIdentifiers)

3. Another question that is not clear in the spec is if an action (staging in or staging out) moves into an exception state does that mean that the activity moves into the exception state right away or does it mean that it ever moves into the exception state. Does it mean that if one of the actions moves into an exception state that all other actions are halted and moved to the exception state and then the activity? - I proposed that actions state have no impact on the activity state. If an action has an exception or is terminated then it should not have any impact on the activity what so every.

4. Another not so important change but it might help clarify some confusion and allow for extendibility later on would be to get rid of the "ExecutionPending" and "ExecutionComplete" and make the "Running" state a composite state like the "StagingIn" and "StagingOut" states. This will give the ability to handle complex multiple application execution definitions that the JSDL group is looking at for the next rev of the Job Definition. This will allow for multiple Application actions. This is not workflow. Nor should it be considered the start of workflow. This just allows for extendibility easily.

At 02:44 PM 11/16/2005 -0500, Andrew Grimshaw wrote:

All,

Many people are at SC this week and cannot make the telecon. As next Thursday is Thanksgiving here in the US (one of the top two holidays) I propose that we skip next weeks telecon as well, and schedule our next telecom for Thursday, December 1, at the usual time.

The primary issue on the table is the use of WS-Names in BES. There is a proposal under discussion in the OGSA-WG to prohibit mandatory use of WS-Names in ANY OGSA specification. That would impact BES in that the current specification requires the use of WS-Names as return types and parameters to many of the operations.

This has generated a proposal (during discussions) that if WS-Names cannot be mandated, that BES revert to the original draft use of AbstractNames (i.e. strings) as the parameters and return values of the functions.

Another issue that needs discussion is some changes to the document itself. As Mark Morgan has begun implementing a prototype of the draft specification several under-specified, or incompletely specified issues have come up. In separate email he discussed some of those. We will need to take actions (yea/nea) on some of his choices.

Andrew Grimshaw

Professor of Computer Science

University of Virginia

434-982-2204

grimshaw@cs.virginia.edu

_______________________________________________________________ Ian Foster www.mcs.anl.gov/~foster Math & Computer Science Div. Dept of Computer Science Argonne National Laboratory The University of Chicago Argonne, IL 60439, U.S.A. Chicago, IL 60637, U.S.A. Tel: 630 252 4619 Fax: 630 252 1997 Globus Alliance, www.globus.org