Re: [gin-ops] [gin-auth] start Savannah run
Thanks David, Yes, it looks like the .r0 hasn't been updated on tg-grid: ginuser@tg-grid1:/etc/grid-security> openssl crl -noout -text -in /etc/grid-security/certificates/1e12d831.r0 Certificate Revocation List (CRL): Version 1 (0x0) Signature Algorithm: md5WithRSAEncryption Issuer: /C=AU/O=APACGrid/OU=CA/CN=APACGrid/Email=camanager@vpac.org Last Update: Jan 3 05:20:37 2007 GMT Next Update: Feb 2 05:20:37 2007 GMT Can someone update it? Thanks, Colin --- Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 Room H7.26, Level 7, Building H, Monash University Caulfield 3145, Australia
-----Original Message----- From: David Bannon [mailto:D.Bannon@vpac.org] Sent: Tuesday, 6 February 2007 1:42 PM To: Cindy Zheng Cc: 'Colin Enticott'; 'Terrence Martin'; gin-auth@ggf.org; gin-ops@ggf.org Subject: Re: [gin-auth] [gin-ops] start Savannah run
To check a crl, do this -
openssl crl -noout -text -in crl.pem
It will show -
Last Update: Feb 6 01:13:14 2007 GMT Next Update: Mar 8 01:13:14 2007 GMT for example.
Now, its possible that the .r0 file has not been updated recently because of -
* an error in the local cron job that gets it (check date). * an error in the IGTF repository (unlikely) * an error in the generation of the CRL (no, I checked!)
David
Hi, Colin,
APAC current crl is http://ca.apac.edu.au/pub/crl/cacrl.pem.
Cindy
-----Original Message----- From: Colin Enticott [mailto:Colin.Enticott@csse.monash.edu.au] Sent: Monday, February 05, 2007 4:47 PM To: 'Terrence Martin' Cc: 'JP Navarro'; gin-auth@ggf.org; gin-ops@ggf.org; zhengc@sdsc.edu Subject: RE: [gin-ops] [gin-auth] start Savannah run
Hi Terrence,
I temporarily removed the CRL's from my certificate directory and the same error appears. If I am reading the error correctly, it looks like the server's APAC CRL has expired (1e12d831.r0)? I'd test on the command
but I don't know how to get the expiry date from a .r0 file.
Regards, Colin
--- Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 Room H7.26, Level 7, Building H, Monash University Caulfield 3145, Australia
-----Original Message----- From: Terrence Martin [mailto:tmartin@physics.ucsd.edu] Sent: Tuesday, 6 February 2007 11:24 AM To: Colin Enticott Cc: 'JP Navarro'; gin-auth@ggf.org; gin-ops@ggf.org; zhengc@sdsc.edu Subject: Re: [gin-ops] [gin-auth] start Savannah run
Hi Colin, that was my next question if the CRL is up to date. :) I have seen the SSL handshake problem with clock synch issues however CRL out of date is something to watch for. Interesting I am told in at least some versions if the CRL directory is empty the test to see if the CRL is out of date never fails....
Terrence
Colin Enticott wrote:
Hi Terrence,
The clock on remus and tg-grid1 are within a few seconds of each other (maybe closer, I can't type that fast). Using Mike's suggestion (thankyou Mike) it looks like the "server" has an expired revocation list:
$ globus-url-copy -vb -dbg gsiftp://tg-gridftp.uc.teragrid.org:2811/etc/hosts file:///tmp/null
debug: starting to get gsiftp://tg- gridftp.uc.teragrid.org:2811/etc/hosts debug: connecting to gsiftp://tg- gridftp.uc.teragrid.org:2811/etc/hosts debug: response from gsiftp://tg- gridftp.uc.teragrid.org:2811/etc/hosts: 220 tg-s004.uc.teragrid.org GridFTP Server 2.1 (gcc32dbg, 1122653280-63) ready.
debug: authenticating with gsiftp://tg-gridftp.uc.teragrid.org:2811/etc/hosts debug: response from gsiftp://tg- gridftp.uc.teragrid.org:2811/etc/hosts: 530-globus_xio: Authentication Error 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Invalid CRL: The available CRL has expired 530 End.
debug: fault on connection to gsiftp://tg-gridftp.uc.teragrid.org:2811/etc/hosts debug: data callback, error the server sent an error response: 530 530-globus_xio: Authentication Error 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Invalid CRL: The available CRL has expired 530 End. , buffer 0xb7e76008, length 0, offset=0, eof=true debug: operation complete
error: the server sent an error response: 530 530-globus_xio: Authentication Error 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Could not verify credential 530-globus_gsi_callback_module: Invalid CRL: The available CRL has expired 530 End.
Regards, Colin
--- Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 Room H7.26, Level 7, Building H, Monash University Caulfield 3145, Australia
-----Original Message----- From: Terrence Martin [mailto:tmartin@physics.ucsd.edu] Sent: Tuesday, 6 February 2007 5:27 AM To: Colin Enticott Cc: 'JP Navarro'; gin-auth@ggf.org; gin-ops@ggf.org; zhengc@sdsc.edu Subject: Re: [gin-ops] [gin-auth] start Savannah run
Just in case, can you confirm that the time is synchronized on the local and remote system?
Terrence
Colin Enticott wrote:
Hi JP Navarro,
The same problem has happened again. Output from gt2.4:
$ globusrun -a -r globus.infotech.monash.edu.au
GRAM Authentication test successful $ globusrun -a -r tg-grid1.uc.teragrid.org
GRAM Authentication test failure: authentication failed: GSS Major Status: Authentication Failed GSS Minor Status Error Chain:
init.c:499: globus_gss_assist_init_sec_context_async: Error during
context
initialization init_sec_context.c:171: gss_init_sec_context: SSLv3 handshake
globus_i_gsi_gss_utils.c:888: globus_i_gsi_gss_handshake: Unable to
verify
remote side's credentials globus_i_gsi_gss_utils.c:854: globus_i_gsi_gss_handshake: SSLv3
handshake
problems: Couldn't do ssl handshake OpenSSL Error: s3_pkt.c:1046: in library: SSL routines, function SSL3_READ_BYTES: sslv3 alert certificate expired
I recently renewed my APAC certificate, but it should be the same. globus.infotech.monash.edu.au worked without change.
Help!
Regards, Colin
--- Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 Room H7.26, Level 7, Building H, Monash University Caulfield 3145,
Australia
> -----Original Message----- > From: JP Navarro [mailto:navarro@mcs.anl.gov] > Sent: Thursday, 4 January 2007 3:00 AM > To: Colin Enticott > Cc: gin-auth@ggf.org; gin-ops@ggf.org; 'Terrence Martin'; >
zhengc@sdsc.edu
> Subject: Re: [gin-ops] [gin-auth] start Savannah run > > Colin, > > We didn't have the Monash University CA configured on tg- > grid1.uc.teragrid.org. > This has now been fixed. > > Regards, > > JP Navarro > > On Jan 3, 2007, at 2:13 AM, Colin Enticott wrote: > > > >> First of all, Happy new year everyone! >> >> Thankyou for your help last year. >> >> I have two quick questions: >> >> I am now receiving a "certificate expired" message from >> tg-grid1.uc.teragrid.org. My certificate still works elsewhere. >> Is it the >> server's certificate? >> >> And on osg-gw-2.t2.ucsd.edu, I need to write ~80GB of data for
>> experiment. Which directory can I use? >> >> Thanks, >> Colin >> >> --- >> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >> Room H7.26, Level 7, Building H, Monash University Caulfield 3145, >> Australia >> >> >> >> >>> -----Original Message----- >>> From: Terrence Martin [mailto:tmartin@physics.ucsd.edu] >>> Sent: Tuesday, 5 December 2006 5:41 PM >>> To: Colin Enticott >>> Cc: 'Yoshio Tanaka'; D.Bannon@vpac.org; navarro@mcs.anl.gov; gin- >>> auth@ggf.org; gin-ops@ggf.org >>> Subject: Re: [gin-ops] [gin-auth] start Savannah run >>> >>> colin, if you want to try logging into >>> >>> colin@uaf-1.t2.ucsd.edu >>> >>> run >>> >>> source /data/vdt/setup.sh >>> >>> then grab a cert with grid-proxy-init and give it a try. >>> >>> It is the machine that all my users use to submit to my OSG site. >>> >>> Terrence >>> >>> >>> >>> Colin Enticott wrote: >>> >>> >>>> Hi Yoshio, >>>> >>>> I've tried it from 3 servers. On the server I have root access >>>> on, I >>>> >>>> >>> just >>> >>> >>>> manually synced and I am still having the problem. I am >>>> wondering if >>>> >>>> >>> the CA >>> >>> >>>> certificate I sent is okay. It's the APAC CA files we use here >>>> on our >>>> servers. >>>> >>>> On the Pragma resources, I have been using my old certificate (as >>>> >>>> >>> initially >>> >>> >>>> there was teething problems with the new APAC CA). Can you >>>> update your >>>> server with the details below and I'll give it a try: >>>> >>>> http://wiki.pragma-grid.net/index.php?title=ColinDetails >>>> >>>> Thanks, >>>> Colin >>>> >>>> --- >>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145, >>>> >>>> >>> Australia >>> >>> >>>> >>>>> -----Original Message----- >>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka@aist.go.jp] >>>>> Sent: Tuesday, 5 December 2006 4:51 PM >>>>> To: Colin.Enticott@csse.monash.edu.au >>>>> Cc: D.Bannon@vpac.org; tmartin@physics.ucsd.edu; >>>>> navarro@mcs.anl.gov; >>>>> >>>>> >>> gin- >>> >>> >>>>> auth@ggf.org; gin-ops@ggf.org; yoshio.tanaka@aist.go.jp >>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run >>>>> >>>>> >>>>> Hi Colin, >>>>> >>>>> Are you able to submit jobs to PRAGMA machines? >>>>> If yes, the APAC CA on your machine should have no problem. >>>>> >>>>> One point that I would like to confirm is... >>>>> Is the time of your client machine correct? Do you use an NTP >>>>> server >>>>> for synchronize the time? >>>>> >>>>> Thanks, >>>>> >>>>> -- >>>>> Yoshio Tanaka (yoshio.tanaka@aist.go.jp) >>>>> http://ninf.apgrid.org/ >>>>> http://www.apgridpma.org/ >>>>> >>>>> >>>>> From: Colin Enticott <Colin.Enticott@csse.monash.edu.au> >>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run >>>>> Date: Tue, 05 Dec 2006 16:38:40 +1100 >>>>> Message-ID: <01df01c7182f$9f59a3d0$1e46c282@nail> >>>>> >>>>> >>>>> >>>>> >>>>>> Hi Yoshio, >>>>>> >>>>>> I am unable to log in. But below is what JP sent me. Any ideas on >>>>>> >>>>>> >>> what >>> >>> >>>>> it >>>>> >>>>> >>>>> >>>>>> means? >>>>>> >>>>>> Doing a Google I find: >>>>>> The error might arise from an expired certificate or when >>>>>> trying to >>>>>> >>>>>> >>>>>> >>>>> restore >>>>> >>>>> >>>>> >>>>>> certification expiration date and job are in some state in
>>>>>> Grid >>>>>> execution list. >>>>>> >>>>>> I guess it might be a problem with the APAC CA on your >>>>>> machines? Was >>>>>> >>>>>> >>>>>> >>>>> the CA >>>>> >>>>> >>>>> >>>>>> set up previously? Or did you use the ones on my info page? (This >>>>>> >>>>>> >>>>>> >>>>> leaves >>>>> >>>>> >>>>> >>>>>> the question if I packaged them correctly). >>>>>> >>>>>> >>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote: >>>>>> >>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>> PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 (/var/globus/prews- >>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log) >>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>> PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at Thu >>>>>> Nov 30 >>>>>> 18:49:42 2006 >>>>>> >>>>>> Failed reading length 0 >>>>>> GSS authentication failure >>>>>> globus_gss_assist token :3: read failure: Connection closed >>>>>> Failure: GSS failed Major:01090000 Minor:00000000 Token:00000003 >>>>>> >>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>> PID: 9608 -- Failure: GSS failed Major:01090000 Minor:00000000 >>>>>> Token:00000003 >>>>>> >>>>>> >>>>>> Colin >>>>>> >>>>>> --- >>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield 3145, >>>>>> >>>>>> >>>>>> >>>>> Australia >>>>> >>>>> >>>>> >>>>>>> -----Original Message----- >>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka@aist.go.jp] >>>>>>> Sent: Tuesday, 5 December 2006 12:51 PM >>>>>>> To: Colin.Enticott@csse.monash.edu.au >>>>>>> Cc: D.Bannon@vpac.org; tmartin@physics.ucsd.edu; >>>>>>> navarro@mcs.anl.gov; >>>>>>> >>>>>>> >>>>>>> >>>>> gin- >>>>> >>>>> >>>>> >>>>>>> auth@ggf.org; gin-ops@ggf.org; yoshio.tanaka@aist.go.jp >>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run >>>>>>> >>>>>>> >>>>>>> Hi Colin, >>>>>>> >>>>>>> If you can login to these machines, see the globus >>>>>>> gatekeeper's log >>>>>>> >>>>>>> >>>>>>> >>>>> at: >>>>> >>>>> >>>>> >>>>>>> ${GLOBUS_LOCATION}/var/globus-gatekeeper.log >>>>>>> >>>>>>> You may find error logs such as no entry in mapfile and >>>>>>> failure in >>>>>>> tracing cert chain. >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> -- >>>>>>> Yoshio Tanaka (yoshio.tanaka@aist.go.jp) >>>>>>> http://ninf.apgrid.org/ >>>>>>> http://www.apgridpma.org/ >>>>>>> >>>>>>> From: Colin Enticott <Colin.Enticott@csse.monash.edu.au> >>>>>>> Subject: RE: [gin-ops] [gin-auth] start Savannah run >>>>>>> Date: Tue, 05 Dec 2006 12:24:42 +1100 >>>>>>> Message-ID: <01c001c7180c$24c430e0$1e46c282@nail> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Thanks Yoshio, >>>>>>>> >>>>>>>> So it looks like authentication issues as I can connect to >>>>>>>> port 2119 >>>>>>>> >>>>>>>> >>>>>>>> >>>>> on >>>>> >>>>> >>>>> >>>>>>> both >>>>>>> >>>>>>> >>>>>>> >>>>>>>> hosts: >>>>>>>> >>>>>>>> cme@edda$ globusrun -a -r tg-grid1.uc.teragrid.org >>>>>>>> >>>>>>>> GRAM Authentication test failure: connecting to the job manager >>>>>>>> >>>>>>>> >>>>>>>> >>>>> failed. >>>>> >>>>> >>>>> >>>>>>>> Possible reasons: job terminated, invalid job contact, network >>>>>>>> >>>>>>>> >>>>>>>> >>>>> problems, >>>>> >>>>> >>>>> >>>>>>> ... >>>>>>> >>>>>>> >>>>>>> >>>>>>>> cme@edda$ globusrun -a -r osg-gw-2.t2.ucsd.edu >>>>>>>> >>>>>>>> GRAM Authentication test failure: connecting to the job manager >>>>>>>> >>>>>>>> >>>>>>>> >>>>> failed. >>>>> >>>>> >>>>> >>>>>>>> Possible reasons: job terminated, invalid job contact, network >>>>>>>> >>>>>>>> >>>>>>>> >>>>> problems, >>>>> >>>>> >>>>> >>>>>>> ... >>>>>>> >>>>>>> >>>>>>> >>>>>>>> Regards, >>>>>>>> Colin >>>>>>>> >>>>>>>> --- >>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield >>>>>>>> 3145, >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> Australia >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> -----Original Message----- >>>>>>>>> From: Yoshio Tanaka [mailto:yoshio.tanaka@aist.go.jp] >>>>>>>>> Sent: Tuesday, 5 December 2006 12:21 PM >>>>>>>>> To: Colin.Enticott@csse.monash.edu.au >>>>>>>>> Cc: D.Bannon@vpac.org; tmartin@physics.ucsd.edu; >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>> navarro@mcs.anl.gov; >>>>> >>>>> >>>>> >>>>>>> gin- >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> auth@ggf.org; gin-ops@ggf.org; yoshio.tanaka@aist.go.jp >>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Colin, >>>>>>>>> >>>>>>>>> Please test the authentication by the following command: >>>>>>>>> >>>>>>>>> % globusrun -a -r osg-gw-2.t2.ucsd.edu >>>>>>>>> >>>>>>>>> % globusrun -a -r tg-grid1.uc.teragrid.org >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Yoshio Tanaka (yoshio.tanaka@aist.go.jp) >>>>>>>>> http://ninf.apgrid.org/ >>>>>>>>> http://www.apgridpma.org/ >>>>>>>>> >>>>>>>>> >>>>>>>>> From: Colin Enticott <Colin.Enticott@csse.monash.edu.au> >>>>>>>>> Subject: Re: [gin-ops] [gin-auth] start Savannah run >>>>>>>>> Date: Tue, 05 Dec 2006 11:44:05 +1100 >>>>>>>>> Message-ID: <017401c71806$77cf6760$1e46c282@nail> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> Thanks David, >>>>>>>>>> >>>>>>>>>> But still the same problem. As you can see, my certificate >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>> still >>>>> >>>>> >>>>> >>>>>>> works >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> on >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> the vpac host and there is definitely no firewall in the way: >>>>>>>>>> >>>>>>>>>> cme@edda$ grid-proxy-init -cert usercert.pem.APACGrid - key >>>>>>>>>> userkey.pem.APACGrid >>>>>>>>>> Your identity: /C=AU/O=APACGrid/OU=Monash University/CN=Colin >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> Enticott >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> Enter GRID pass phrase for this identity: >>>>>>>>>> Creating proxy ................................... Done >>>>>>>>>> Your proxy is valid until: Tue Dec 5 23:28:47 2006 >>>>>>>>>> cme@edda$ globus-job-run osg-gw- 2.t2.ucsd.edu/jobmanager- fork >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> /bin/uname >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> -a >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> GRAM Job submission failed because the connection to the >>>>>>>>>> server >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> failed >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> (check host and port) (error code 12) >>>>>>>>>> cme@edda$ globus-job-run tg- grid1.uc.teragrid.org/jobmanager- >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>> fork >>>>> >>>>> >>>>> >>>>>>>>> /bin/uname >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> -a >>>>>>>>>> GRAM Job submission failed because the connection to the >>>>>>>>>> server >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>> failed >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>> (check host and port) (error code 12) >>>>>>>>>> cme@edda$ globus-job-run ng1.vpac.org/jobmanager-fork /bin/ >>>>>>>>>> uname >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>> -a >>>>> >>>>> >>>>> >>>>>>>>>> Linux ng1.vpac.org 2.6.16.29-xen #4 SMP Sun Oct 15 13:20:46 >>>>>>>>>> BST >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>> 2006 >>>>> >>>>> >>>>> >>>>>>>>> i686 >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>> i686 i386 GNU/Linux >>>>>>>>>> cme@edda$ telnet tg-grid1.uc.teragrid.org 2119 >>>>>>>>>> Trying 192.5.198.225... >>>>>>>>>> Connected to tg-grid1.uc.teragrid.org. >>>>>>>>>> Escape character is '^]'. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Connection closed by foreign host. >>>>>>>>>> cme@edda$ telnet osg-gw-2.t2.ucsd.edu 2119 >>>>>>>>>> Trying 137.110.141.17... >>>>>>>>>> Connected to osg-gw-2.t2.ucsd.edu. >>>>>>>>>> Escape character is '^]'. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Connection closed by foreign host. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Any other thoughts from anyone? >>>>>>>>>> >>>>>>>>>> Thanks, >>>>>>>>>> Colin >>>>>>>>>> >>>>>>>>>> --- >>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>>>>>>>> Room H7.26, Level 7, Building H, Monash University Caulfield >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>> 3145, >>>>> >>>>> >>>>> >>>>>>>>> Australia >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>> -----Original Message----- >>>>>>>>>>> From: David Bannon [mailto:D.Bannon@vpac.org] >>>>>>>>>>> Sent: Monday, 4 December 2006 6:08 PM >>>>>>>>>>> To: JP Navarro >>>>>>>>>>> Cc: Colin Enticott; gin-auth@ggf.org; gin-ops@ggf.org; >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>> 'Terrence >>>>> >>>>> >>>>> >>>>>>>>> Martin' >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>> Subject: Re: [gin-auth] start Savannah run >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Colin, you can run as a Gin user on any of the VPAC machines, >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>> my >>>>> >>>>> >>>>> >>>>>>> be >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>> easier to debug.... >>>>>>>>>>> >>>>>>>>>>> David >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Fri, 2006-12-01 at 12:34 -0600, JP Navarro wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>>> Colin, >>>>>>>>>>>> >>>>>>>>>>>> The error in the logs is below. Not sure what it means. >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> Could >>>>> >>>>> >>>>> >>>>>>> you >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>> try this >>>>>>>>>>>> test again from your SDSC TeraGrid account so we can rule >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> out >>>>> >>>>> >>>>> >>>>>>>>>>>> software and >>>>>>>>>>>> firewall issues? >>>>>>>>>>>> >>>>>>>>>>>> Thanks, >>>>>>>>>>>> >>>>>>>>>>>> JP >>>>>>>>>>>> >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>>>>>>>> PID: 9608 -- Notice: 0: GATEKEEPER_ACCT_FD=5 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>> (/var/globus/prews- >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>> gram-4.0.1-r3-i1/log/globus-gatekeeper.log) >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>>>>>>>> PID: 9608 -- Notice: 6: Got connection 198.202.88.52 at >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> Thu >>>>> >>>>> >>>>> >>>>>>> Nov 30 >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>> 18:49:42 2006 >>>>>>>>>>>> >>>>>>>>>>>> Failed reading length 0 >>>>>>>>>>>> GSS authentication failure >>>>>>>>>>>> globus_gss_assist token :3: read failure: Connection >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> closed >>>>> >>>>> >>>>> >>>>>>>>>>>> Failure: GSS failed Major:01090000 Minor:00000000 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> Token:00000003 >>>>> >>>>> >>>>> >>>>>>>>>>>> TIME: Thu Nov 30 18:49:42 2006 >>>>>>>>>>>> PID: 9608 -- Failure: GSS failed Major:01090000 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>> Minor:00000000 >>>>> >>>>> >>>>> >>>>>>>>>>>> Token:00000003 >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On Nov 30, 2006, at 7:05 PM, Colin Enticott wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> Thanks JP, >>>>>>>>>>>>> >>>>>>>>>>>>> But I am running into some problems. I've tried both from >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>> our >>>>> >>>>> >>>>> >>>>>>>>>>>>> server and >>>>>>>>>>>>> rocks-52 and this is what I get: >>>>>>>>>>>>> [cme@rocks-52 ~]$ globus-job-run tg- grid1.uc.teragrid.org/ >>>>>>>>>>>>> jobmanager-fork >>>>>>>>>>>>> /bin/uname -a >>>>>>>>>>>>> GRAM Job submission failed because the connection to
>>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>> server >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> failed >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>> (check host and port) (error code 12) >>>>>>>>>>>>> [cme@rocks-52 ~]$ grid-proxy-info >>>>>>>>>>>>> subject : /C=AU/O=APACGrid/OU=Monash University/CN=Colin >>>>>>>>>>>>> Enticott/CN=1087048434 >>>>>>>>>>>>> issuer : /C=AU/O=APACGrid/OU=Monash University/CN=Colin >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>> Enticott >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>> identity : /C=AU/O=APACGrid/OU=Monash University/CN=Colin >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>> Enticott >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>> type : Proxy draft (pre-RFC) compliant impersonation >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>> proxy >>>>> >>>>> >>>>> >>>>>>>>>>>>> strength : 512 bits >>>>>>>>>>>>> path : /home/cme/globus_proxy.APACGrid >>>>>>>>>>>>> timeleft : 836:30:26 (34.8 days) >>>>>>>>>>>>> [cme@rocks-52 ~]$ ssh tg-grid1.uc.teragrid.org >>>>>>>>>>>>> Warning: Permanently added 'tg-grid1.uc.teragrid.org' >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>> (RSA) to >>>>> >>>>> >>>>> >>>>>>> the >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>> list of >>>>>>>>>>>>> known hosts. >>>>>>>>>>>>> Permission denied (external- >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>> keyx,gssapi,publickey,gssapi,hostbased). >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>> [cme@rocks-52 ~]$ >>>>>>>>>>>>> >>>>>>>>>>>>> That is the certificate that I registered with. I also >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>> tried >>>>> >>>>> >>>>> >>>>>>> the >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>> ssh key >>>>>>>>>>>>> pair I put up on the pragma wiki. >>>>>>>>>>>>> >>>>>>>>>>>>> Any thoughts? >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks, >>>>>>>>>>>>> Colin >>>>>>>>>>>>> >>>>>>>>>>>>> --- >>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>> Caulfield >>>>> >>>>> >>>>> >>>>>>> 3145, >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>> Australia >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>> From: JP Navarro [mailto:navarro@mcs.anl.gov] >>>>>>>>>>>>>> Sent: Friday, 1 December 2006 2:47 AM >>>>>>>>>>>>>> To: Colin Enticott >>>>>>>>>>>>>> Cc: zhengc@sdsc.edu; 'Terrence Martin'; gin- ops@ggf.org; >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>> 'Oscar >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>> Koeroo'; >>>>>>>>>>>>>> gin-auth@ggf.org >>>>>>>>>>>>>> Subject: Re: start Savannah run >>>>>>>>>>>>>> >>>>>>>>>>>>>> Colin, >>>>>>>>>>>>>> >>>>>>>>>>>>>> You should be set to go on the UC/ANL TeraGrid cluster. >>>>>>>>>>>>>> >>>>>>>>>>>>>> GT4 Pre-WS GRAM: tg-grid1.uc.teragrid.org:2119 >>>>>>>>>>>>>> GT4 WS GRAM: tg-grid1.uc.teragrid.org:8443 (FORK, >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>> PBS) >>>>> >>>>> >>>>> >>>>>>>>>>>>>> GT4 GridFTP: tg-gridftp.uc.teragrid.org:2811 >>>>>>>>>>>>>> >>>>>>>>>>>>>> Regards, >>>>>>>>>>>>>> >>>>>>>>>>>>>> JP >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Nov 30, 2006, at 2:43 AM, Colin Enticott wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thankyou everyone. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I am now registered on the GIN VO (well, I appear here: >>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile). >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> What is my next step? >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>> Colin >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> --- >>>>>>>>>>>>>>> Colin Enticott, Research Scientist, Ph: +61 03 9903 2215 >>>>>>>>>>>>>>> Room H7.26, Level 7, Building H, Monash University >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>> Caulfield >>>>> >>>>> >>>>> >>>>>>>>> 3145, >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>> Australia >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc@sdsc.edu] >>>>>>>>>>>>>>>> Sent: Thursday, 30 November 2006 11:59 AM >>>>>>>>>>>>>>>> To: 'Terrence Martin' >>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops@ggf.org; 'Oscar Koeroo'; >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>> 'Colin >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>> Enticott'; gin- >>>>>>>>>>>>>>>> auth@ggf.org >>>>>>>>>>>>>>>> Subject: RE: FW: start Savannah run >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Thank you, Terrence! >>>>>>>>>>>>>>>> We'll wait to hear from Colin when Colin finishes >>>>>>>>>>>>>>>> registering to gin vo. >>>>>>>>>>>>>>>> Cindy >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>>> From: Terrence Martin >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> [mailto:tmartin@physics.ucsd.edu] >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> Sent: Wednesday, November 29, 2006 11:36 AM >>>>>>>>>>>>>>>>> To: Oscar Koeroo >>>>>>>>>>>>>>>>> Cc: zhengc@sdsc.edu; 'JP Navarro'; gin- ops@ggf.org; >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> 'Colin >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> Enticott'; gin-auth@ggf.org >>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Oscar Koeroo wrote: >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Hi Terrence and Cindy, >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Getting new users up for registration on the GIN VO >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> is >>>>> >>>>> >>>>> >>>>>>> easy. >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>>> To be >>>>>>>>>>>>>>>>>> able to access the secured website and for >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> authentication >>>>> >>>>> >>>>> >>>>>>>>> reasons >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>> during the registration process new users must have >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> their >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> certificate >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> loaded and ready in their webbrowser. The VOMS server >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> is >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> loaded with >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> all IGTF accredited CAs including the Fermilab kCA. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Go to the website: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> https://kuiken.nikhef.nl:8443/voms/gin.ggf.org/ and >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> apply for a "New user registration". >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> The usual VOMS configuration info is also available. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> I >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> don't know what >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> you'll need to populate a GUMS server. This VOMS >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> server >>>>> >>>>> >>>>> >>>>>>> is as >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> any >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>> other so I guess you can use your regular setup. >>>>>>>>>>>>>>>>>> In addition to the secured interface I've also made >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>> available >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> a >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>> non-secured way of grabbing a grid-mapfile. >>>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/grid-mapfile >>>>>>>>>>>>>>>>>> There is also an RSS-feed pointing to the grid- >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> mapfile >>>>> >>>>> >>>>> >>>>>>> and >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>> the secured >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> interface at >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> http://kuiken.nikhef.nl/gin.ggf.org/feed- >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> gin.ggf.org.xml >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>>> Unfortunately I'm not aware of a clear guide. I do >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> know a >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>>> guide for >>>>>>>>>>>>>>>>>> creating the packed certificate files that go into >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> your >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> browser if you >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> start from a two PEM formated files (certificate file >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> + >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>>> private key >>>>>>>>>>>>>>>>>> file) that's at >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> http://certificate.nikhef.nl/info/browser >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>>> Once a user has passed that stage, the registration >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>> for >>>>> >>>>> >>>>> >>>>>>> the >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>> VO is as >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> trivial as any web-forum account registration. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> I am assuming this user already has a grid cert since >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> they >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> list a DN so >>>>>>>>>>>>>>>>> only VOMS registration is required. Once that is done >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>> either I >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>> run my >>>>>>>>>>>>>>>>> update of GUMS manually or in 720/2 minutes on average >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> the >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> user will be >>>>>>>>>>>>>>>>> automatically downloaded into my GUMS database. I >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> actually >>>>> >>>>> >>>>> >>>>>>> do >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>> not have >>>>>>>>>>>>>>>>> to do anything, but I can speed things up ever so >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>> slightly >>>>> >>>>> >>>>> >>>>>>> if >>>>>>> >>>>>>> >>>>>>> >>>>>>>>> I >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>> am in >>>>>>>>>>>>>>>>> the office and someone asks me to try refreshing gums. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Terrence >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Oscar >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> Cindy Zheng wrote: >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Sounds right, Terrence. Let me ask Oscar who has >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>> helped >>>>> >>>>> >>>>> >>>>>>> me >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>> with GIN >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> VO before. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Hi, Oscar, >>>>>>>>>>>>>>>>>>> Could you advise Colin what need to be done to be >>>>>>>>>>>>>>>>>>> added in GIN VO? >>>>>>>>>>>>>>>>>>> I'm also cc'ing to gin-auth list. >>>>>>>>>>>>>>>>>>> If there is a guide for potential GIN users,
On Mon, 2007-02-05 at 18:16 -0800, Cindy Zheng wrote: line, problems the the the please
>>>>>>>>>>>>>>>>>>> let me know the url and I can link it to our GINOPS >>>>>>>>>>>>>>>>>>> page. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Cindy >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -----Original Message----- >>>>>>>>>>>>>>>>>>>> From: Terrence Martin >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>> [mailto:tmartin@physics.ucsd.edu] >>>>> >>>>> >>>>> >>>>>>>>> Sent: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 3:24 PM >>>>>>>>>>>>>>>>>>>> To: zhengc@sdsc.edu >>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops@ggf.org; 'Colin Enticott' >>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> The quickest and easiest way for me is to have him >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>> added to >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>>>>> a VO. >>>>>>>>>>>>>>>>>>>> How easy is it to add him to the GIN VO? One in >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>> there I >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> can hit my >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> gums reload and he will be able to access UCSD as a >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>> GIN >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>>>>> user. Any >>>>>>>>>>>>>>>>>>>> other approach requires me hacking his DN into my >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>> local >>>>> >>>>> >>>>> >>>>>>>>>>>>>>>>> VO which I >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> prefer to avoid and does not help him with any >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>> other >>>>> >>>>> >>>>> >>>>>>> site. >>>>>>> >>>>>>> >>>>>>> >>>>>>>>>>>>>>>>>>>> Terrence >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thanks, Terrence, for the quick reply! >>>>>>>>>>>>>>>>>>>>> Colin has not been a GIN user. >>>>>>>>>>>>>>>>>>>>> What do you think it's the best way to get
colin > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> access? > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> Cindy > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>>>>>>>>>>>>>>> From: Terrence Martin > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> [mailto:tmartin@physics.ucsd.edu] > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>> Sent: > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> Tuesday, November 28, 2006 2:53 PM > > >>>>>>>>>>>>>>>>>>>>>>>>> To: zhengc@sdsc.edu > > >>>>>>>>>>>>>>>>>>>>>>>>> Cc: 'JP Navarro'; gin-ops@ggf.org > > >>>>>>>>>>>>>>>>>>>>>>>>> Subject: Re: FW: start Savannah run > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> We only have a production cluster, but I should > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> still > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>> be > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> able to help. > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> I do not seem to have Colin in my GUMS database > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> though > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> for > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> GIN or any > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> other VO. Should he be downloaded with GIN's > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> users? > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> Terrence > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> Cindy Zheng wrote: > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Hi, JP and Terrence, > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Could you help Colin to get ready to run > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> Savannah > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> application on your GIN testbed clusters? > > >>>>>>>>>>>>>>>>>>>>>>>>>> You can find Colin's user info at > > >>>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma- > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> grid.net/index.php?title=ColinDetails > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> If you need more info or action from Colin, or > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> have > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>> any questions > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> for Colin or me, please let us know. > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Thank you very much! > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Cindy > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> -----Original Message----- > > >>>>>>>>>>>>>>>>>>>>>>>>>> From: Cindy Zheng [mailto:zhengc@sdsc.edu] > > Sent: > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>> Tuesday, > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> November 28, 2006 2:31 PM > > >>>>>>>>>>>>>>>>>>>>>>>>>> To: 'gin-ops@ggf.org' > > >>>>>>>>>>>>>>>>>>>>>>>>>> Subject: start Savannah run > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Dear all, > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Thanks for all the people involved to help make > > >>>>>>>>>>>>>>>>>>>>>>>>>> TDDFT application run and GIN testbed > > monitoring > > >>>>>>>>>>>>>>>>>>>>>>>>>> very fruitful experiments! We have learned a > > lot > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> and > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>> have > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> presented our learnings at OGF and SC06. > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Let's continue our collaborative effort with > > our > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> plan > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> - start our > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> next experiment with Savannah > > >>>>>>>>>>>>>>>>>>>>>>>>>> fire simulation - a data-intensive application, > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> to > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>> explore data > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> related interoperation issues. > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> Colin Enticott at Monash University of > > Australia > > >>>>>>>>>>>>>>>>>>>>>>>>>> is the lead driver. Colin has documented the > > >>>>>>>>>>>>>>>>>>>>>>>>>> introduction and requirements of this > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> application at > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.pragma- > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> grid.net/index.php?title=Savannah > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> or go to > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> http://forge.gridforum.org/sf/wiki/do/viewPage/ > > >>>>>>>>>>>>>>>>>>>>>>>>> projects.gin/wi > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> ki/GinOps > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> click "Savannah" under "Applications", > > >>>>>>>>>>>>>>>>>>>>>>>>> where "first Savannah experiment" is refering to > > >>>>>>>>>>>>>>>>>>>>>>>>> a previous experiment in PRAGMA testbed. The > > >>>>>>>>>>>>>>>>>>>>>>>>> "second Savannah experiment" is the one for GIN > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> testbed. > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> We like to run this application on all Grids in > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> GIN > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>> testbed, but > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> in 2 steps. First, we will run it on > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> PRAGMA/TeraGrid/OSG - since > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> these should be relatively easier to do. We like > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> to > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>> get > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> this done > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> before the year end. > > >>>>>>>>>>>>>>>>>>>>>>>>> The next step, Colin will work with EGEE and > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> Nordugrid > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> to develop possible solutions, to enable > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>> interoperation > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> and to include all 5 Grids in the run. > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> Thanks in advance for your continued help with > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>> this! > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> Cindy > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> -- > > >>>>>>>>>>>>>>> gin-auth mailing list > > >>>>>>>>>>>>>>> gin-auth@ogf.org > > >>>>>>>>>>>>>>> http://www.ogf.org/mailman/listinfo/gin-auth > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>>>> > > >>>>>>>>>>>>> -- > > >>>>>>>>>>>>> gin-ops mailing list > > >>>>>>>>>>>>> gin-ops@ogf.org > > >>>>>>>>>>>>> http://www.ogf.org/mailman/listinfo/gin-ops > > >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > >>>>>>>>>>>>> > > >>>>>>> > > >>> > > >>> > > > > > > > > > > > -- > gin-auth mailing list > gin-auth@ogf.org > http://www.ogf.org/mailman/listinfo/gin-auth
participants (1)
-
Colin Enticott