Dear all, the new GridForge seems now to be finished, so DRMAA is also back again: https://forge.gridforum.org/sf/projects/drmaa-wg I would like to take the chance for the following changes in our outside world representation: * Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ... * Change the GridForge project startup page, and replace charts with some informative text. * Move the DRMAA test suite source code and binary releases to GridForge. Comments ? Regards, Peter.
Please note that while the data transition is complete, some configuration changes to GF and some instabilities are to be expected during this week. I don't want to discourage you to use it, not at all, but please be patient :-) Cheers, Andre. Quoting [Peter Troeger] (Jun 07 2006):
Date: Wed, 07 Jun 2006 10:19:01 +0200 From: Peter Troeger <peter.troeger@hpi.uni-potsdam.de> To: DRMAA Working Group <drmaa-wg@gridforum.org> Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
* Move the DRMAA test suite source code and binary releases to GridForge.
Comments ?
Regards, Peter.
-- "So much time, so little to do..." -- Garfield
On Wed, 7 Jun 2006, Peter Troeger wrote:
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I agree with both.
* Move the DRMAA test suite source code and binary releases to GridForge.
Comments ?
Does the latter have any implication on DRMAA test suite source license? Regards, Andreas
Andreas Haas schrieb:
On Wed, 7 Jun 2006, Peter Troeger wrote:
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I agree with both.
* Move the DRMAA test suite source code and binary releases to GridForge.
Comments ?
Does the latter have any implication on DRMAA test suite source license?
Sun donated the N1GE test suite code without restrictions to DRMAA group. The group made several modifications to it, so it is now really a piece work by itself. I don't see a reason while code in GridForge falls under any GGF software licence. So far, only the specs and presentations are copyrighted by GGF. Hrabri, this might be a good question for our area directors. Peter.
Regards, Andreas
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright. Regards Hrabri
Comments ?
Regards, Peter.
Hi Folx, sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow. It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help. Cheers, Andre. Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
Comments ?
Regards, Peter.
-- "So much time, so little to do..." -- Garfield
In sum, we talk about a moving target. Too bad. We will wait with major changes until someone declares GridForge as stable again. Regards, Peter. Andre Merzky schrieb:
Hi Folx,
sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow.
It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help.
Cheers,
Andre.
Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
Comments ?
Regards, Peter.
Sorry for the inconvenience. We'll definitely send a note to all groups when we are done, hopefully still this week. Thanks, Andre. Quoting [Peter Troeger] (Jun 08 2006):
In sum, we talk about a moving target. Too bad. We will wait with major changes until someone declares GridForge as stable again.
Regards, Peter.
Andre Merzky schrieb:
Hi Folx,
sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow.
It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help.
Cheers,
Andre.
Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
Comments ?
Regards, Peter.
-- "So much time, so little to do..." -- Garfield
The groups facade is in place - please check out http://forge.ggf.org/sf/projects/drmaa-wg I would like to encourage you to have a custom entry page on the integrated wiki, if the group facade is not good enough for your purposes. Alternatively, it is possible to change/extend the information used for the group facade. Cheers, Andre. PS.: a cache refresh might be needed to see the change Quoting [Andre Merzky] (Jun 08 2006):
Sorry for the inconvenience. We'll definitely send a note to all groups when we are done, hopefully still this week.
Thanks, Andre.
Quoting [Peter Troeger] (Jun 08 2006):
In sum, we talk about a moving target. Too bad. We will wait with major changes until someone declares GridForge as stable again.
Regards, Peter.
Andre Merzky schrieb:
Hi Folx,
sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow.
It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help.
Cheers,
Andre.
Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
Comments ?
Regards, Peter.
-- "So much time, so little to do..." -- Garfield
Thx Andre, We would like to customize the entry page. Are there any customized pages already available? Thx Hrabri
-----Original Message----- From: Andre Merzky [mailto:andre@merzky.net] Sent: Thursday, June 08, 2006 8:26 AM To: Peter Troeger Cc: Andre Merzky; Hrabri Rajic; 'DRMAA Working Group' Subject: Re: [drmaa-wg] New GridForge
The groups facade is in place - please check out http://forge.ggf.org/sf/projects/drmaa-wg
I would like to encourage you to have a custom entry page on the integrated wiki, if the group facade is not good enough for your purposes. Alternatively, it is possible to change/extend the information used for the group facade.
Cheers, Andre.
PS.: a cache refresh might be needed to see the change
Quoting [Andre Merzky] (Jun 08 2006):
Sorry for the inconvenience. We'll definitely send a note to all groups when we are done, hopefully still this week.
Thanks, Andre.
Quoting [Peter Troeger] (Jun 08 2006):
In sum, we talk about a moving target. Too bad. We will wait with
major
changes until someone declares GridForge as stable again.
Regards, Peter.
Andre Merzky schrieb:
Hi Folx,
sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow.
It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help.
Cheers,
Andre.
Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
Subject: [drmaa-wg] New GridForge
Dear all,
the new GridForge seems now to be finished, so DRMAA is also back again:
https://forge.gridforum.org/sf/projects/drmaa-wg
I would like to take the chance for the following changes in our outside world representation:
* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway need to correct all links, so it is the same work to prepare this wiki page. I would suggest to stick with our own Wiki installation - DRMAA.ORG should not completely rely on GridForge availability ;-) ...
* Change the GridForge project startup page, and replace charts with some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
Comments ?
Regards, Peter. -- "So much time, so little to do..." -- Garfield
Hi Hrabri, the entry page cannot be customized directly, as the data on it are pulled from a data base. You can extend/change these infos in the database however, as I said below: for that, you can use the tools from the 'living charter' project which Joel created. Joel, could you forward Hrabri the links to the tools? I did not bookmark them *blush* That sounds more complicated then a wiki entry page, we know. The motivation is: - to provide a uniform entry page - to have the important group info (charter, milestones, chair infos etc) available in a data base, to allow for consistent usage in various places, and for the GGF roadmap etc. - ADs and chairs etc are supposed to be able to check for milestones and progress by querying the data base Cheers, Andre. Quoting [Hrabri Rajic] (Jun 08 2006):
Thx Andre,
We would like to customize the entry page.
Are there any customized pages already available?
Thx
Hrabri
-----Original Message----- From: Andre Merzky [mailto:andre@merzky.net] Sent: Thursday, June 08, 2006 8:26 AM To: Peter Troeger Cc: Andre Merzky; Hrabri Rajic; 'DRMAA Working Group' Subject: Re: [drmaa-wg] New GridForge
The groups facade is in place - please check out http://forge.ggf.org/sf/projects/drmaa-wg
I would like to encourage you to have a custom entry page on the integrated wiki, if the group facade is not good enough for your purposes. Alternatively, it is possible to change/extend the information used for the group facade.
Cheers, Andre.
PS.: a cache refresh might be needed to see the change
Quoting [Andre Merzky] (Jun 08 2006):
Sorry for the inconvenience. We'll definitely send a note to all groups when we are done, hopefully still this week.
Thanks, Andre.
Quoting [Peter Troeger] (Jun 08 2006):
In sum, we talk about a moving target. Too bad. We will wait with
major
changes until someone declares GridForge as stable again.
Regards, Peter.
Andre Merzky schrieb:
Hi Folx,
sorry that this is not obvious rtight now, but the startup page will be automatically created from the data base info (charter, milestones, mailing list info etc). That should be in place tomorrow.
It might be interesting to you that its possible to integrate drmaa.org into an additional tool button in GF. The project admin should find a respective option in the project configuration section. Let me know if you want that, and need help.
Cheers,
Andre.
Quoting [Hrabri Rajic] (Jun 07 2006):
From: Hrabri Rajic <hrabri@sbcglobal.net> To: 'DRMAA Working Group' <drmaa-wg@gridforum.org> Subject: RE: [drmaa-wg] New GridForge Date: Wed, 7 Jun 2006 08:32:08 -0500
[ .. ]
>Subject: [drmaa-wg] New GridForge > >Dear all, > >the new GridForge seems now to be finished, so DRMAA is also back again: > >https://forge.gridforum.org/sf/projects/drmaa-wg > >I would like to take the chance for the following changes in our outside >world representation: > >* Change DRMAA.ORG start page to one of the DRMAA Wiki pages. We anyway >need to correct all links, so it is the same work to prepare this wiki >page. I would suggest to stick with our own Wiki installation - >DRMAA.ORG should not completely rely on GridForge availability ;-) ... > >* Change the GridForge project startup page, and replace charts with >some informative text.
I am OK with both. For the second proposal we would need to check if GGF has any imposed templates for the group starting pages.
>* Move the DRMAA test suite source code and binary releases to GridForge.
GGF claims everything on there pages ... and stick its copyright.
Regards
Hrabri
>Comments ? > >Regards, >Peter. -- "So much time, so little to do..." -- Garfield
-- "So much time, so little to do..." -- Garfield
participants (5)
-
'Andre Merzky' -
Andre Merzky
-
Andreas Haas -
Hrabri Rajic -
Peter Troeger