Did not adopt the proposal below, and errata 2.100 remains as documented. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 ----- Forwarded by Steve Hanson/UK/IBM on 08/01/2013 18:05 ----- From: Steve Hanson/UK/IBM To: dfdl-wg@ogf.org, Date: 08/01/2013 14:44 Subject: Re: Fw: [DFDL-WG] Action 183 - chicken-and-egg situation with lengths given by expressions If we had the following we would have three behaviours which I think would cover the identified scenarios. a) dfdl:lengthKind = "explicit", dfdl:length is an integer => length is specified on parsing & unparsing b) dfdl:lengthKind = "explicit", dfdl:length is an expression => length is specified on parsing & unparsing (expression must evaluate) - scenarios 1 & 2 below - Mike's scenario where length is specified externally c) dfdl:lengthKind = "expression", dfdl:length must be an expression => length is specified on parsing, but variable on unparsing (expression not evaluated) - new enum - scenario 3 below - replaces errata 2.100 - matches occursCountKind 'expression' behaviour Alternatively we leave errata 2.100 as it is and for Mike's scenario the application must do the padding before it passes the infoset values to the unparser. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 From: Steve Hanson/UK/IBM To: dfdl-wg@ogf.org, Date: 11/12/2012 10:36 Subject: Fw: [DFDL-WG] Action 183 - chicken-and-egg situation with lengths given by expressions The email thread which provided the material for the discussion which led to: 2.100. Section 12.3.1. State that when unparsing an element with lengthKind ‘explicit’ and where length is an expression, then the data in the Infoset is treated as variable length and not fixed length. The behaviour is the same as lengthKind ‘prefixed’. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 ----- Forwarded by Steve Hanson/UK/IBM on 16/11/2012 16:04 ----- From: Tim Kimber/UK/IBM@IBMGB To: dfdl-wg@ogf.org, Date: 11/09/2012 12:39 Subject: Re: [DFDL-WG] Action 183 - chicken-and-egg situation with lengths given by expressions Sent by: dfdl-wg-bounces@ogf.org Good point. The problem is that lengthKind-'explicit' is being used for two things: a) a length that is static b) a length that is calculated ...so the DFDL serializer must assume that the expression needs to be evaluated. For occursCountKind we have separate values for 'fixed' and 'expression'. If we did not, then occursCountKind would have the same problem except that it would affect defaulting rather than padding. regards, Tim Kimber, DFDL Team, Hursley, UK Internet: kimbert@uk.ibm.com Tel. 01962-816742 Internal tel. 37246742 From: Steve Hanson/UK/IBM@IBMGB To: dfdl-wg@ogf.org, Date: 11/09/2012 12:27 Subject: [DFDL-WG] Action 183 - chicken-and-egg situation with lengths given by expressions Sent by: dfdl-wg-bounces@ogf.org This mail is on the expected behaviour of the DFDL unparser when writing out a 'data' element the length of which is held in an earlier 'len' element. There are several scenarios, some straightforward and some that exhibit a chicken-and-egg behaviour. The principle of what happens is understood, the action is to make sure that the behaviour is explained in enough detail in the spec to enable implementations to be consistent. (Note - IBM DFDL does not yet support outputVaueCalc so has not hit this yet). Scenarios follow. The 'data' element shown is simple, but the same principles apply if it is complex. 1) 'len' is set from infoset - 'len' can be set in augmented infoset - No issue as 'data's length expression may be evaluated <xsd:element name="message1"> <xsd:complexType> <xsd:sequence> <xsd:element name="len" type="xsd:int" dfdl:lengthKind="explicit" dfdl:length="2" /> <xsd:element name="data" type="xsd:string" dfdl:length="{/message1/len}" dfdl:lengthKind="explicit" /> </xsd:sequence> </xsd:complexType> </xsd:element> 2) 'len' is set using outputValueCalc with fixed expression - When 'len's outputValueCalc is encountered, it can be evaluated then and there - 'len' can be set in augmented infoset - No issue as 'data's length expression may be evaluated <xsd:element name="message1"> <xsd:complexType> <xsd:sequence> <xsd:element name="len" type="xsd:int" dfdl:outputValueCalc="{10}" dfdl:lengthKind="explicit" dfdl:length="2" /> <xsd:element name="data" type="xsd:string" dfdl:length="{/message1/len}" dfdl:lengthKind="explicit" /> </xsd:sequence> </xsd:complexType> </xsd:element> 3) 'len' is set using outputValueCalc with reference 'data' (unpadded) - When 'len's outputValueCalc is encountered, it can not yet be evaluated as it depends on the length of 'data' - 'len' can not yet be set in augmented infoset - Problem as 'data's length expression can not be evaluated - But we do know the unpadded length of 'data' so 'len's outputValueCalc can now be evaluated - In turn this means that 'data's length expression can now be evaluated <xsd:element name="message1"> <xsd:complexType> <xsd:sequence> <xsd:element name="len" type="xsd:int" dfdl:outputValueCalc="{dfdl:unpaddedLength(/message1/data)}" dfdl:lengthKind="explicit" dfdl:length="2" /> <xsd:element name="data" type="xsd:string" dfdl:length="{/message1/len}" dfdl:lengthKind="explicit" /> </xsd:sequence> </xsd:complexType> </xsd:element> 4) 'len' is set using outputValueCalc with reference 'data' (padded) - When 'len's outputValueCalc is encountered, it can not yet be evaluated as it depends on the length of 'data' - 'len' can not yet be set in augmented infoset - Problem as 'data's length expression can not be evaluated - We don't know the padded length of 'data' because we don't know 'len' - Problem: 'data's length expression can never be evaluated <xsd:element name="message1"> <xsd:complexType> <xsd:sequence> <xsd:element name="len" type="xsd:int" dfdl:outputValueCalc="{dfdl:representationLength(/message1/data)}" dfdl:lengthKind="explicit" dfdl:length="2" /> <xsd:element name="data" type="xsd:string" dfdl:length="{/message1/len}" dfdl:lengthKind="explicit" /> </xsd:sequence> </xsd:complexType> </xsd:element> Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 From: Steve Hanson/UK/IBM To: dfdl-wg@ogf.org Date: 04/09/2012 17:31 Subject: Fw: Behaviour for lengthKind 'endOfparent' is still not fully specified DFDL WG call 4th Sept 2012: 1) Agreed that for binary data, only xs:hexBinary and packed/BCD allowed to have endOfParent 2) Agreed this is the correct behaviour when filling to a known length 3) Agreed this is the correct behaviour when filling to a known length 4) Agreed this is the correct behaviour when filling to a known length It was noted that lengthKind 'explicit' on the parent may not result in a known length if the length is an expression. This is an example of a more general chicken-and-egg situation with lengths given by expressions, for which outputValueCalc and DFDL functions unpaddedLength() were added can be used. Action raised to ensure that the behaviour of an implementation is fully defined by the spec. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 ----- Forwarded by Steve Hanson/UK/IBM on 04/09/2012 17:24 ----- From: Steve Hanson/UK/IBM To: dfdl-wg@ogf.org <dfdl-wg@ogf.org> Date: 04/09/2012 14:08 Subject: Behaviour for lengthKind 'endOfparent' is still not fully specified Noted when I reviewed latest spec - endOfParent and unparsing is not fully thought through. The spec today says that I can use endOfParent with binary data. There is a restriction in section 12.3.8, but it only applies when an element is endOfParent and its parent is lengthKind delimited. There are a couple of cases to consider: 1) Binary data of restricted length (see list in other email "proposed clarification/narrowing - delimited binary data should decimal"). I don't think it makes sense to allow these. We don't allow these binary reps for delimited. 2) Text data of variable length when unparsing. Box scenario. If the data in the infoset is shorter than the space in the box, what we do? I think we should pad to box length with appropriate padChar, according to justification, as that is effectively a 'specified length'. Error if textPadKind is 'none'. Use parent's lengthUnits. 3) HexBinary data of variable length when unparsing. Box scenario. If the data in the infoset is shorter than the space in the box, what we do? I think we should right-pad to box length with fill byte, as that is effectively a 'specified length'. 4) Packed/BCD binary data of variable length when unparsing. Box scenario. If the data in the infoset is shorter than the space in the box, what we do? I think we should pad to box length with zero bytes, according to justification, as that is effectively a 'specified length'. (Must be zero bytes and not fill byte as must be numeric in order to be parsed). In relation to 2 - 4, note that lengthKind 'endOfParent' can only be used with a parent lengthKind of 'explicit', 'pattern', 'prefixed' or 'endOfParent' or a choice with choiceLengthKind 'explicit', so the box scenario when unparsing therefore occurs only when lengthKind is 'explicit' or choiceLengthKind is 'explicit' - these are the cases when the length is known. Also note that when there are nested 'endOfParent' elements (which is allowed) then all padding must be done on the simple element (ie, the innermost element), to ensure that what is output can be parsed. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU -- dfdl-wg mailing list dfdl-wg@ogf.org https://www.ogf.org/mailman/listinfo/dfdl-wg Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU -- dfdl-wg mailing list dfdl-wg@ogf.org https://www.ogf.org/mailman/listinfo/dfdl-wg Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU