Hi Mike,
Can you clarify if you are saying that
OCK expression should be prohibited completely on a choice member (as occurrences
for OCK expression are potentially optional regardless of minOccurs value)
Or is your statement that it should
cause an SDE specific to the count==0 case?
Kind Regards,
- Alex
Alex Wood -
Software Engineer -
WebSphere Message Broker Development
DFDL Development
MP 211, IBM UK Labs, Hursley Park, Winchester, Hants. SO21 2JN.
Tel: Internal 246272, External 01962 816272
Notes: Alex Wood1/UK/IBM@IBMGB
e-mail: wooda@uk.ibm.com
From:
Mike Beckerle <mbeckerle.dfdl@gmail.com>
To:
Alex Wood1/UK/IBM@IBMGB
Date:
24/04/2015 15:10
Subject:
Re: [DFDL-WG]
OCK expression and count of 0 for a choice member....
I think this is an SDE.
Choice branches cannot be optional.
Optional here, does not mean minOccurs == 0, because for
many occursCountKinds, that's never checked unless validation is on, and
validation doesn't guide parsing anyway.
Optional here means "not required by the DFDL format",
as in occursCountKind cannot be 'parsed' at all, because all occurrences
are then not required, and the min/maxOccurs are only examined for validation
purposes, also occursCountKind cannot be 'implicit' for the same reasons,
and occursCountKind 'expression' also.
Wrapping the array element in a sequence doesn't solve
the problem unless the sequence has a required piece of syntax such as
an initiator or terminator, or a hiddenGroupRef to a not-optional (recursively)
thing.
Even initiator and terminator are tricky, because in a non-delimited format,
those can be %WSP*; which can match nothing at all; hence, they do not
"require" any syntax.
Mike Beckerle | OGF DFDL Workgroup Co-Chair | Tresys Technology
| www.tresys.com
Please note: Contributions to the DFDL Workgroup's email
discussions are subject to the OGF
Intellectual Property Policy
On Fri, Apr 24, 2015 at 9:07 AM, Alex Wood1 <WOODA@uk.ibm.com>
wrote:
Hi All,
Please see below for a history of the issue.
This arose from fuzz testing of the IBM DFDL parser which produced a test
with a coutn of 0 for an OCK expression array which was a choice
member. And subsequent reference to the specification.
It was not clear what the correct outcome should be in a choice where the
first member is an array using OCK expression where the count resolves
to 0.
a.) resolve the choice to the zero length array
b.) move to the next choice branch
c.) throw an error
Kind Regards,
- Alex
Alex Wood -
Software Engineer -
WebSphere Message Broker Development
DFDL Development
MP 211, IBM UK Labs, Hursley Park, Winchester, Hants. SO21 2JN.
Tel: Internal 246272, External 01962 816272
Notes: Alex Wood1/UK/IBM@IBMGB
e-mail: wooda@uk.ibm.com
From: Steve
Hanson/UK/IBM
To: Alex
Wood1/UK/IBM@IBMGB
Cc: Andrew
Edwards/UK/IBM@IBMGB, Mark Frost/UK/IBM
Date: 24/04/2015
09:19
Subject: Re:
OCK expression and count of 0 for a choice member....
When I wrote the paragraph below, the one thing that troubled me was that
the spec defines known-to-exist and known-not-to-exist in terms of occurrences.
In the choice branch example, it is the element as a whole we are looking
at. That's fine for scalar as element == occurrence but for an array it's
not the same. I think the spec is missing a definition of what 'missing'
means for an array element. I would say that an array element is missing
if all occurrences are missing. And an array element is not missing if
any occurrence has a representation (empty, nil, normal). With that
in place, my paragraph makes sense, I think.
I believe we have the same issue with 'parsed' and 'stopValue'.
Regards
Steve Hanson
Architect, IBM
DFDL
Co-Chair, OGF
DFDL Working Group
IBM SWG, Hursley, UK
smh@uk.ibm.com
tel:+44-1962-815848
From: Steve
Hanson/UK/IBM
To: Alex
Wood1/UK/IBM@IBMGB
Cc: Andrew
Edwards/UK/IBM@IBMGB, Mark Frost/UK/IBM@IBMGB
Date: 23/04/2015
18:52
Subject: Re:
OCK expression and count of 0 for a choice member....
Here is one interpretation...
A choice is resolved by parsing the branches until one is known-to-exist
as described in section 9.3.3. Section 9.3.1.2 defines known-to-exist
(in the absence of a discriminator, initiator or direct dispatch) as an
occurrence having empty, nil or normal representation. Section 9.3.1.3
defines known-not-to-exist (again in the absence of a discriminator, initiator
or direct dispatchm or an assert) as an occurrence being missing or causing
a processing error. If occursCount is zero no occurrences are looked for
in the data (erratum 5.9) so the element has no representation and must
be missing. Therefore a choice branch containing such an element is known-not-to-exist.
So in your example, the first choice branch containing myInt is known-not-to-exist
and the parser tries the next branch.
This appears to contradict section 15.1.1 though. I suspect that 15.1.1
was not updated to match section 9.3 when the latter was added.
If you want to make the first choice branch known-to-exist when the count
is zero then I think wrapping myInt in a sequence would work. Or wrapping
myInt in a complex element.
Definitely one to take to the WG though, if only to correct section 15.1.1
to match section 9.
Regards
Steve Hanson
Architect, IBM
DFDL
Co-Chair, OGF
DFDL Working Group
IBM SWG, Hursley, UK
smh@uk.ibm.com
tel:+44-1962-815848
From: Alex
Wood1/UK/IBM
To: Steve
Hanson/UK/IBM@IBMGB
Cc: Andrew
Edwards/UK/IBM@IBMGB, Mark Frost/UK/IBM@IBMGB
Date: 23/04/2015
16:33
Subject: OCK
expression and count of 0 for a choice member....
Hi Steve
Just been discussing this with Andy and Mark.
I think the spec
<xs:element name="Choice_Expression" dfdl:ref="config"
dfdl:lengthKind="implicit">
<xs:complexType>
<xs:sequence dfdl:ref="config">
<xs:element ref="myCount"></xs:element>
<xs:choice
dfdl:choiceLengthKind="implicit" dfdl:ref="config">
<xs:element
ref="myInt" minOccurs="1" maxOccurs="3"></xs:element>
<xs:element ref="myTxt"></xs:element>
</xs:choice>
</xs:sequence>
</xs:complexType>
</xs:element>
Where myInt
has occursCountKind="expression"
occursCount="{../myCount}"
A given instance of this message could have myCount==0
Is this valid?
Should it resolve to 0 occurrences of myInt or move on to myTxt ?
Section15 of the spec says:
The Root of the Branch MUST NOT be optional. That is XSDL minOccurs MUST
BE greater than 0.
But in this case minOccurs is >0.
Assuming this is not an error then in terms of resolving the choice section
15.1.1 says..
15.1.1 Resolving Choices via Speculation Speculative resolution works as
follows:
1) Attempt to parse the first branch of the choice.
2) If this fails with a processing error
a) If a dfdl:discriminator evaluated to true earlier on this branch then
the parser is 'bound' to this branch and parsing of the entire choice construct
fails with a processing error.
b) If the branch has a dfdl:initiator and the choice has dfdl:initiatedContent
‘yes’ then the parser is 'bound' to this branch and parsing of the entire
choice construct fails with a processing error. c) Otherwise we repeat
from step 1 for the next branch of the choice.
3) It is a processing error if the branches of the choice are exhausted.
4) If a branch is successfully parsed without error, then that branch's
infoset becomes the infoset for the parse of the choice construct.
So seems like this is 4.) we did not fail to parse myInt...
However talking with mark about real scenarios that this might apply to,
a choice two repeating fields with counts earlier in the data only one
of which must appear. you'd expect 0 of the first means >0 of the second
and visa versa... So you'd probably want 0 myInt allowed the choice to
resolve to myTxt.
Thoughts ?
If you agree we need more clarity in he spec will forward to WG.
Kind Regards,
- Alex
Alex Wood -
Software Engineer -
WebSphere Message Broker Development
DFDL Development
MP 211, IBM UK Labs, Hursley Park, Winchester, Hants. SO21 2JN.
Tel: Internal 246272, External 01962 816272
Notes: Alex Wood1/UK/IBM@IBMGB
e-mail: wooda@uk.ibm.com
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU
--
dfdl-wg mailing list
dfdl-wg@ogf.org
https://www.ogf.org/mailman/listinfo/dfdl-wg
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6
3AU