Updated to reflect the outcome of DFDL WG call on 5th April. Revised details: A new dfdl:element property is added called dfdl:elementID of type 'DFDL String Literal'. This provides a single alternative name for the element. Only allowed on local element and global element, not on element reference or simple type. A new dfdl:choice property is added called dfdl:choiceBranchRef of type 'DFDL Expression'. The expression must evaluate to a DFDL String Literal. The resultant string must match (case insensitive) the dfdl:elementID property values of one of the element branches of the choice, and if so discriminates in favour of that branch. The parser then goes straight to that branch, ignoring schema order. Because the branch is 'known to exist' no backtracking takes place if a processing error subsequently occurs. Rules: - Both properties behave like dfdl:ref and dfdl:hiddenGroupRef in that it is not possible to set a value in scope by a dfdl:format annotation, and is only set at its point of use. This is because there is nothing sensible that could be set in scope **. Empty string is not an allowed value. - Both properties are only used when parsing. - When dfdl:choiceBranchRef is present, all choice branches must be local elements or element references. It is a schema definition error otherwise. - It is a processing error if the resolved value of dfdl:choiceBranchRef does not match one of the branches. - It is a schema definition error if individual dfdl:elementID values are not unique across all elements that are branches of an xs:choice that carries dfdl:choiceBranchRef. - It is not a schema definition error if both dfdl:initiatedContent and dfdl:choiceBranchRef, are provided on the same choice, nor if a discriminator exists on that choice branch. ++ ** Consequently adding support for the property to existing DFDL implementations will not suddenly cause errors to appear in existing DFDL schemas. ++ Reasoning. If a discriminator is evaluated and there is no point of uncertainty, it simply behaves like an assert, specifically if it fails it causes a processing error without backtracking. Use of dfdl:choiceBranchRef is just another way to get into this situation. (The property dfdl:initiatedContent may be rewritten as a series of discriminators on the child elements which test that the (initiated) element exists, hence same applies). Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 ----- Forwarded by Steve Hanson/UK/IBM on 28/03/2012 16:32 ----- From: Steve Hanson/UK/IBM To: dfdl-wg@ogf.org Date: 27/03/2012 14:09 Subject: Fw: [DFDL-WG] Action 145: 'dispatch' way of discriminating a choice for better performance Hi Mike I agree. When I wrote the SWIFT example expression that I realised this was becoming a bit too complicated. IBM MRM has a quick way of dispatching a choice that uses a similar mechanism to the one you propose. It has an optional property called 'Message Alias'. The parser first tries to match the tag against the element name, and if that fails it tries the alias. I've modified my proposal accordingly. Regarding wildcards, the approach you show was what we had agreed upon a couple of years ago when we dropped wildcards. I would prefer not to add them back in for 1.0, but I have had some feedback from IBMers modeling envelope/payload formats that they want a loose-coupling approach as that fits better with other tools and is scalable. Let's treat this as a separate issue. I'll go back to the IBMers so that I fully understand their concerns, and if necessary I will bring back to the WG as a new agenda item. So all we need to ensure for now is that whatever mechanism we come up with is extensible to wildcards, if needed. Revised details: A new dfdl:element property is added called dfdl:elementAlias of type 'List of String'. This provides one or more alternative names for the element. Only allowed on local element and global element, not on element reference or simple type. A new dfdl:choice property is added called dfdl:choiceBranchRef of type DFDL Expression. The expression must evaluate to String. The string must match (case insensitive) either the element name or one of the dfdl:elementAlias property values of one of the element branches of the choice, and if so discriminates in favour of that branch. The parser then goes straight to that branch, ignoring schema order. Because the branch is 'known to exist' no backtracking takes place if a processing error occurs. Rules: - Both properties behave like dfdl:ref and dfdl:hiddenGroupRef in that it is not possible to set a value in scope by a dfdl:format annotation, and is only set at its point of use. This is because there is nothing sensible that could be set in scope. But it has the benefit that adding support for the property to existing DFDL implementations will not suddenly cause errors to appear in existing DFDL schemas. Empty string is not an allowed value. - Both properties are only used when parsing. - When dfdl:choiceBranchRef is preent, all choice branches must be local elements or element references. It is a schema definition error otherwise. - It is a processing error if the resolved xs:string value of dfdl:choiceBranchRef does not match one of the branches. - It is a schema definition error if a choice has both dfdl:choiceBranchRef set and dfdl:initiatedContent="yes". - It is a schema definition error if individual dfdl:elementAlias values are not unique a) across all elements that are branches of a given xs:choice and b) across all global elements in the schema. So we now have the ability to apply a simple lookup before we start to process a choice. That makes the processing time for each branch of the choice independent of its order in the schema. Questions: - What happens if we encounter a discriminator once we are processing the branch and its point of uncertainty is the choice ? Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 ----- Forwarded by Steve Hanson/UK/IBM on 27/03/2012 13:41 ----- From: Mike Beckerle <mbeckerle.dfdl@gmail.com> To: Steve Hanson/UK/IBM@IBMGB Cc: dfdl-wg@ogf.org Date: 21/03/2012 15:57 Subject: Re: [DFDL-WG] Action 145: 'dispatch' way of discriminating a choice for better performance (updated) Sent by: dfdl-wg-bounces@ogf.org The whole point of this thing is to be faster, not more general, so my reaction is too much XPath expression complexity here. Consider this. If the tag is some 2-character code that does NOT want to be the same as the element names (for example because they're digits, so they can't be the element names exactly since element names have to begin with an alpha char. Digits also aren't useful from readability perspective as names), then you'll need a big lookup table in the choiceBranchRef expression that translates from the codes to the QNames. We don't have a case statement in the expression language, so you've just moved the big linear evaluation chain out of evaluating choice discriminators one after another and into a big if-then-else nest in the choiceBranchRef expression. I don't see a performance gain here. I suggest dropping the QName stuff, and requiring a dfdl:choiceID property on the elements that is an NCName. (Well, we might want those QName functions anyway in the expression language. But I wouldn't use them for this rapid choice dispatch feature. You could certainly use them in discriminators. ) The expression would then have to evaluate to a value that is matched against this choiceID. I suggest exact match, not respecting ignoreCase for example. That eliminates all the QName complexity and is amenable to high-speed compact lookup table implementation. I tend to think the element names want to be a little bit more descriptive than these tag values would want to be so using the element names as the tags feels undesirable to me. Particularly because we want the tags to be conveniently computed, for example by just grabbing a fixed-length string out of a data field. You end up with something like this: <element name="tag" type="string" dfdl:length="{ 2 }" ..../> <choice dfdl:choiceBranchRef="{ ../tag }"> <element name="someName" dfdl:choiceID="02" .../> <element name="anotherName" dfdl:choiceID="73" .../> .... </choice> As for the wild-card issue. I think we can finesse this. Consider this model: <element name="tag" type="string" dfdl:length="{ 2 }" ..../> <choice> <!-- fast dispatch for known record types --> <choice dfdl:choiceBranchRef="{ ../tag }"> <element name="someName" dfdl:choiceID="02" .../> <element name="anotherName" dfdl:choiceID="73" .../> .... </choice> <!-- wildcard --> <element name="extensionRecord"> <complexType> <sequence> <!-- keep tag copy in the extension --> <element name="extensionType" type="string" dfdl:inputValueCalc="../../tag" .../> .... </sequence> </complexType> </element> </choice> The inner choice uses the fast dispatch. The outer choice lets me also have an alternative that absorbs a more general syntax to provide some way for a user to model their extensions to the choice set. The extensionType field captures the tag and stores it inside the extension record where it won't get disassociated. The user's "extensionRecord" would not be a special DFDL wildcard construct, just an element format they create which is general enough to parse their extensions. Or this extension could be predefined as part of a standard, to accept any standard-defined acceptable extension record a user might need so long as there is some set of rules all extension records must obey. Given this, do we really need special wildcard constructs? ...mikeb From: Steve Hanson <smh@uk.ibm.com> To: dfdl-wg@ogf.org, Date: 24.03.2012 02:27 Subject: [DFDL-WG] Action 145: 'dispatch' way of discriminating a choice for better performance The enveope/payload style of data format is quite common, where the envelope provides control information and the payload contains the business data. Examples are SWIFT and SAP IDocs. Typically the envelope contains a tag that identifies the payload, which can be one of many types. For SWIFT there are 300 possible types. To model this today in DFDL requires an xs:choice with each type modeled as an xs:element branch of the choice. A discriminator on each xs:element refers back to the envelope tag element thus enabling the choice to be resolved. There are two issues with this approach. 1) Performance. Even if the elements in the branches are ordered for expected frequency, there will still be cases when tens or hundreds of discriminators need to be evaluated before the choice is resolved. 2) Tight coupling. When a new type is added, a new element branch needs to be added to the choice. Action 145 proposes a mechanism to solve issue #1 and which opens the door to a possible extension to DFDL to solve issue #2 - namely a faster way to resolve a choice. Details: A new dfdl:choice property is added called dfdl:choiceBranchRef of type DFDL Expression. The expression must evaluate to a QName which corresponds to one of the element branches of the choice, and asserts 'known to exist' for that branch. Rules: - The property behaves like dfdl:ref and dfdl:hiddenGroupRef in that it is not possible to set a value in scope by a dfdl:format annotation, and is only set at its point of use. This is because there is nothing sensible that could be set in scope. But it has the benefit that adding support for the property to existing DFDL implementations will not suddenly cause errors to appear in existing DFDL schemas. - Empty string is not an allowed value. - The property is only used when parsing. - All branches must be local elements or element references. It is a schema definition error if any branch is a sequence, a choice or a group reference. - It is a processing error if the QName does not resolve to one of the branches when parsing.. - It is a schema definition error if a choice has the property set and also has dfdl:initiatedContent="yes" set locally. - Because the expression must return a QName, the expression language must provide a constructor for creating a QName from a namespace string and a name string. If you take SWIFT MT103 payload as an example, the tag in the envelope says "103" but a DFDL schema would actually model the global MT103 element with name "Document" and namespace ="urn:swift:xsd:fin.103.2011". So the dfdl:choiceBranchRef expression would have to look like: {fn:QName(fn:concat(fn:concat('urn:swift:xsd:fin.', FinMessage/Block2/MessageType), ".2011"), 'Document')} So we now have the ability to derive a QName and apply it before we start to process a choice. That makes the processing time for each branch of the choice independent of its order in the schema. We still have issue #2 so when a new payload is added, a new branch must be added to the choice. A solution to this is to allows xs:any wildcard elements back into DFDL, then provide a property dfdl:wildcardRef which works in the same way as dfdl:choiceRef. So at the point of encountering the wildcard we know its resolution in the schema. This obviously will require some further discussion, but you can see how this ability to evaluate an expression and return a QName can be used in multiple ways. Regards Steve Hanson Architect, Data Format Description Language (DFDL) Co-Chair, OGF DFDL Working Group IBM SWG, Hursley, UK smh@uk.ibm.com tel:+44-1962-815848 Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU -- dfdl-wg mailing list dfdl-wg@ogf.org https://www.ogf.org/mailman/listinfo/dfdl-wg Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU