Ok. let me summarize. I think this is clear now: lengthKind pattern requires everything to be statically known to be text. Fake binary data as iso-8859-1 text since that passes all bytes. assert pattern just tries to decode in current encoding. Binary data might cause decode errors or might not depending on what is in the actual data. Use encoding iso-8859-1 to preclude this possibility, or user-beware/know-the-data. The behavior of decode errors is controlled by encodingErrorPolicy, which clearly states that if the policy is 'error' then a processing error is issued. It specifically states that this applies in all situations including lengthKind pattern, and pattern asserts. The description does not leave any wiggle room here. (There's a separate email thread on asserts with expressions that get errors but it does not yet discuss pattern asserts.) So the wording that says "results are not predictable" should instead explain and provide a reference to the description of encodingErrorPolicy. On Thu, Jul 11, 2013 at 5:57 AM, Steve Hanson <smh@uk.ibm.com> wrote:
In the original DFDL 1.0 spec this is what we used to say about lengthKind 'pattern'.
*12.3.5.1 Pattern-Based Lengths - Scanability*
*Any element (complex, simple text, simple binary) may have a dfdl:lengthKind 'pattern' as long as the bytes in the content region of the element **are legal in the stated encoding of that element. Where a complex element has children with binary representation in practice this means an 8-bit ASCII encoding.
Binary data can be handled by way of treating it as text with encoding='iso-8859-1'. In this case the text is interpreted as in the iso-8859-1 character encoding, and the correspondence of byte values in the data to a string in the DFDL infoset is one to one. That is, byte with value N, produces an infoset character with character code N.*
This was changed by errata 3.9 back in the 4th revision of the Errata document. At the time, the same limit was applied to asserts & discriminators as well. Here is the original errata wording.
*3.9.** Section 12.3.5.1. The spec currently allows lengthKind ‘pattern’ to be used when the representation of the current element, or of a child element, is binary, but imposes restrictions on the encoding that can be in force. However encoding is not necessarily examined for binary elements, so this would introduce another reason for needing encoding.*
*Change the spec so that lengthKind ‘pattern’ is only applicable * *o **elements of simple type with representation 'text'* *o **elements of complex type *
*For an element of complex type:* *1. all simple child elements must have representation 'text' and have the same encoding as the parent complex element, and* *2. all complex child elements must themselves follow 1 and 2 (recursively). *
*Similar wording to apply to dfdl:assert testKind="pattern" in section 7.3.1.*
In the 11th revision of the Errata document, the last sentence was changed to...
*Note that the same restrictions do not** apply to testKind="pattern" on asserts and discriminators*
This was done because an assert or discriminator with testKind 'pattern' is peeking ahead into the data stream from the start of the representation of the object (element / sequence / choice). This was recorded by action 190. *190* *Clarify rules for assert/discriminator testKind 'pattern' (All)* *23/10: Need to be clear on data position and whether it is just for text representations. * *30/10: Closed.** To comply with the timing rules being proposed in action 186, where these things are executed first before a 'format' annotation, the data position must be the beginning of the representation (note warning useful when alignment present). As these things can be used on various objects, the only rule regarding text is that dfdl:encoding must have a value in scope. Errata taken**.*
Personally I am happy for DFDL 1.0 to stick with the current errata, and improve the wording in the testPattern description.
Regards
Steve Hanson Architect, IBM Data Format Description Language (DFDL) Co-Chair, *OGF DFDL Working Group* <http://www.ogf.org/dfdl/> IBM SWG, Hursley, UK* **smh@uk.ibm.com* <smh@uk.ibm.com> tel:+44-1962-815848
From: Tim Kimber/UK/IBM@IBMGB To: dfdl-wg@ogf.org, Date: 11/07/2013 10:08 Subject: Re: [DFDL-WG] issue: scannable and 'results are not predictable' Sent by: dfdl-wg-bounces@ogf.org ------------------------------
There was a time when we disallowed lengthKind='delimited' when representation is 'binary'. Binary data can, in general, contain any sequence of bytes so it might contain the terminating markup. In other words it is not guaranteed to be 'scannable'. We relaxed that rule because we found that there are industry formats out there which contain non-text delimited fields. In other words, the general rule ( binary data is not scannable ) does not always apply in specific formats.
I think that point is relevant to this discussion. Just because the DFDL properties indicate that the data is not *guaranteed* to be scannable, that does not mean that the actual data is not scannable. I believe we should - define the term 'scannable' - acknowledge that when a complex type is not 'scannable' according to the definition, the data still might be parse-able in a reliable way - not prohibit the use of lengthKind='pattern' ( i.e. not issue an SDE ) just because the element is not 'scannable'.
It may well be appropriate for an implementation to issue a warning when lengthKind is 'delimited' or 'pattern' and the element's content is not 'scannable'.
regards,
Tim Kimber, DFDL Team, Hursley, UK Internet: kimbert@uk.ibm.com Tel. 01962-816742 Internal tel. 37246742
From: Mike Beckerle <mbeckerle.dfdl@gmail.com> To: dfdl-wg@ogf.org, Date: 10/07/2013 18:22 Subject: [DFDL-WG] issue: scannable and 'results are not predictable' Sent by: dfdl-wg-bounces@ogf.org ------------------------------
I was editing the definition of scannable into the glossary and when I looked at usage of 'scannable' in testPattern I found this:
In the box for testPattern it says if the data is not scannable "the results are not predictable".
Is that sufficient?
We can sometimes statically determine that the schema says the data should all be scannable (e.g., no change of encoding, no binary elements), and that would rule out one non-predictability. So, if data is non-scannable in the sense that the schema contains say, a binary element, we can issue an SDE if lengthKind is pattern or a testPattern assert is being used.
We could also SDE if runtime-valued encoding properties are used and the encoding changes inside a scannable context.
Well, I guess testKind pattern asserts/discriminators are an issue because they may look only at the first part of the data of a complex component, so they don't require everything to be scannable, only the part the regex actually examines. So in this case it's user-beware, and if non-scannable I suppose we could issue a warning.
But the spec does not say this is an SDE or warning currently. It just says results are not predictable.
There is also the fact that the data might be broken, i.e., the schema might say the data is scannable, but at parse time character decode errors occur. I believe our policy on this is that these cause processing errors. This really is orthogonal to scannable, which is a property of a schema component.
Comments?
-- Mike Beckerle | OGF DFDL Workgroup Co-Chair | Tresys Technology | * www.tresys.com* <http://www.tresys.com/> -- dfdl-wg mailing list dfdl-wg@ogf.org *https://www.ogf.org/mailman/listinfo/dfdl-wg*<https://www.ogf.org/mailman/listinfo/dfdl-wg>
Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU -- dfdl-wg mailing list dfdl-wg@ogf.org https://www.ogf.org/mailman/listinfo/dfdl-wg
Unless stated otherwise above: IBM United Kingdom Limited - Registered in England and Wales with number 741598. Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
-- dfdl-wg mailing list dfdl-wg@ogf.org https://www.ogf.org/mailman/listinfo/dfdl-wg
-- Mike Beckerle | OGF DFDL Workgroup Co-Chair | Tresys Technology | www.tresys.com